LM12 Non- Flush type 4mm detection Inductive NPN PNP Proximity Sensor /sensors for switch board
--- Small size ,long life
--- High precision of repeated location
--- various types of structures
--- Many output forms , good anti-interference
--- High on-off frequency ,wide range of voltage
--- Dust proof, vibration proof, waterproof and oil proof
--- short-circuit protection and inverted connecting protection
Inductive Proximity Sensor Technical data
Mounting | Flush/ non-flush |
SN[mm] | 40mm |
Power supply | 18~30VDC |
Housing size | M18*1mm |
Output | NPN/PNP NO NC |
Indicator | Red LED light |
Protection grade | IP67 |
Repeat accuracy | ≤3% |
Insulation voltage | 1000V/AC 60S |
Linerity | ≤3% |
Output signal | 0-20mA/4-20mA/0-10v/0-5V |
Protection circuit | Surge,overload,short-circuit,reverse polarity |
Frequency | 50Hz 30Hz |
Ambient temp. | -25~+70°C |
Housing material | H62 Copper nickle plated |
Connection | 2M PVC cable |
more products:
Flush | Detection range | 2mm | ||
DC 12-30V | NPN | NO | LM12-3002NA | |
AC 90-250V | NC | LM12-3002NA | ||
NO+NC | LM12-3002NC | |||
PNP | NO | LM12-3002PA | ||
NC | LM12-3002PB | |||
NO+NC | LM12-3002PC | |||
TWO WIRE SYSTEM | NO | LM12-3002LA | ||
NC | LM12-3002LB | |||
SCR controllable silicon | NO | LM12-2002A | ||
NC | LM12-2002B | |||
NO+NC | ||||
Relay output | ||||
Non-flush | Detection range | 4mm | ||
DC 12-30V | NPN | NO | LM12-3004NA | |
AC 90-250V | NC | LM12-3004NB | ||
NO+NC | LM12-3004NC | |||
PNP | NO | LM12-3004PA | ||
NC | LM12-3004PB | |||
NO+NC | LM12-3004PC | |||
TWO WIRE SYSTEM | NO | LM12-3004LB | ||
NC | LM12-3004LA | |||
SCR controllable silicon | NO | LM12-2004A | ||
NC | LM12-2004B | |||
NO+NC | ||||
Relay output | ||||
Control output | DC | 200mA | ||
Output voltage drop DC/AC | DC<3V, AC<10V | |||
Consumption current | DC<15mA, AC<10mA | |||
Standard detected object | 15*15*1 (A3 iron) | |||
Repeated precision | 0.01 | |||
DC/AC | 400Hz/25Hz | |||
Working environment temperature | -25°C~+75°C | |||
Insulation resistance | ≥50MΩ | |||
Material | Metal | |||
Protection grade | IP67 |
FAQ
1. Could I put my own logo on it ?
--- Yes , we can print your logo according to your requirements.
2. How long to make a sample ?
--- it will take around 2-3 working days if samples in stock.
3.How to confirm the sensors?
--- Please advise following information :
Voltage ; NPN/PNP ; NO/NC/NO+NC ; Detected object ; Detected distance...
Contact
Supplier