Products Info
HOME> luggage trolley handle reciprocating fatigue testing machine >
luggage trolley handle reciprocating fatigue testing machine

luggage trolley handle reciprocating fatigue testing machine

Minimum:
1 set
Delivery:
15 days after order.
Model:
hd-d115-1
Country:
china
BrandName:
hd
Package:
each set protected with resin fiber and pp film, then put into strong wooden case with operation manual and video inside.
Payment:
l/c, d/p, t/t
Price:
fob, cif
Minimum:
1 set
Delivery:
15 days after order.
Model:
hd-d115-1
Country:
china
BrandName:
hd
Package:
each set protected with resin fiber and pp film, then put into strong wooden case with operation manual and video inside.
Payment:
l/c, d/p, t/t
Price:
fob, cif
Supplier Info.
Country / Region: / China
Main Products: Tensile testing machine,environmental test chamber,bursting strength tester, Furniture testing equipment
Product Detail

luggage trolley handle reciprocating fatigue testing machine


Introduction
luggage trolley handle reciprocating fatigue testing machine for luggage trolley reciprocating fatigue testing in the test specimen will be stretched, thereby resulting test rod gap, loose, connecting rod failure, deformation.


Theory

luggage trolley handle reciprocating fatigue testing machine -- Under certain pulling and pressing frequency, To check the reciprocating fatigue performance of the pull rod, rod structure of fastness and durability of the switch through the luggage lever lock with a pull rod is continuously pulling switch, reciprocating and pressing.


Usage

Leather suitcase trolley reciprocating fatigue testing machine is used to test fatigue of the reciprocating rod for the luggage. During the test, the rod would be stretched and then test whether there will be backlash, loose, connecting problems and transformation of the rod.


Design Criteria

Design criteria: QB/T 2919-2007.


Specification (table 1)


Item

Specification

Test travel

20~100cm Adjustable

test times

1~999,999 Automatic shutdown

Test  power

pneumatic cylinder

Specimen height

100cm

Auxiliary equipment

Bags fixed clamp

Pressure

5~8Kg/cm2

Machine size

(L×W×H)100×100×200cm

Power

1∮,220V/50HZ

Weight

About150kg




Suitcase Pull Rod Reciprocating Tester include 1-6 specified parts:

1Sample clamp holder: adjust the test size

2pull rod holder

3Rod movement device: do reciprocating motion ,and the speed and travel can be adjustable

4support frame:the height is not less than 1500 mm, Install pulling, pressing travel guide

5pull rod lock switch gear

6countercount the movement times


   

Introduction

1. powerthe machine main power

2. Controller: setting lever operating procedure

3. Strength sensors: show the current value and maximum of the sensor

4. stop: press the key and stop when abnormal situation need to stop the machine in operation

5. Start: start the test and press again the machine will stop


 

Contact

Supplier

Contact us
Tell us your Buying Requirements