Characteristics: | Give excellent rust proofing for bare metal, good adhesion power to steel, aluminum and galvanized steel. |
Pre-treatment: | Dry and Sand and clean the existing finishes, steel, iron and glass fiber reinforced plastic. |
Mixing ratio: | Epoxy Primer : Hardener : Thinner = 5 : 1 : 1-1.5 |
Spray Gun | Gravity feed: 1.4-1.8mm; HVLP: 0.7-2.0 bar |
Spraying | Spray 2-3 coats, total should be 40-60μm Drying time: 5-6 hours at 20 ℃; 30-40 minutes When the temperature is 10 ℃ lower, recommend to bake at 60-70 ℃ for 30 minutes. Dry Sanding: P240-P400 Wet Drying: P600-P800 |
Note | After drying and sanding, re-coat with putty, primer, primer surface and all kinds of topcoat Choose right hardener and thinner to avoid poor curing of paint film. |
Contact
Supplier