WHY Maydos? 
Capable — Top 5 manufacturer in China! Biggest factory in Asia!
Professional — 10 years' experience for export!
Eternal — Stable quality and price!
Supportable — Overseas technical support and return visit after sale!
Description:
Maydos Spray Adhesive SA01 is formulated with good-quality raw materials and conforming to national compulsory standard-GB18583-2001-requirements of restriction of harmful and hazardous substance, possesses such features as low VOC, fresh smell, high solid content, good flexibility, easy application, strong adhesive force, environment-friendly etc. And after hardening, it can be resistant to damp, water, heat, acid, alkali and bumping, so it is widely used for bonding sponge, heat-insulated materials, fiber, wood and thin metal sheet.
Advantages:
1. Easy application.
2. Environmental: benzene free, no hazardous materials and additives and low VOC.
3. Best bonding effect can be achieved even under temperature around 60℃.
4. Fast drying speed and long viscosity-keeping time.
5. Strong bonding strength and good initial bonding power; water-proof and aging resistant.
Where to Use:
It is suitable for bonding different materials such as sponge, foam, sofa, heat-insulated materials, fiber, wood and thin metal sheet.
Technical Data:
Appearance: Light brown liquid
Viscosity: 50-130 Mpa.S/25℃
Solids Content: 30%-35%
Shear Strength:
30 minutes: ≥0.6mpa
48 hours: ≥1.0mpa
Specific Gravity: 0.78kg/L
Initial bonding power: ≥0.6mpa
VOC: ≤200 g/L
Dosage: 185-250g/m2
Shlef Life:
12 months in sealed tins.
Packing Size:
0.5kg, 0.8kg, 2.2kg, 3kg, 15kg, 180kg.
Application Tools:
Brush or spray gun.
Application Method:
1. Surface preparation: the grease, dust, moisture, rust on the bonding surface must be cleaned off. Make sure
that the surface must be dry during rainy days, or it will cause non-stick atmosphere.
2. Application: apply the adhesive evenly on the two bonding surfaces with spray gun and the consumption is 185-
250g/m2. Spray gun with an opening of 2.0-2.5mm and 0.3-0.5Mpa air pressure is recommended.
3. Thickness control: the adhesive should be applied evenly and not too thick to avoid the weakening of the
bonding strength. But for porous materials or materials with coarse surface, you can apply more accordingly.
4. Airing: After application of the adhesive, enough time should be given to let the solvent evaporate completely to
avoid bubble or stickiness. The airing time is about 5-15 minutes/25℃ and varies from the temperature,
humidity and adhesive film. The bonding can be done after the surface is dry by touch. For porous materials,
you can bond directly after application of the adhesive.
5. Bonding: The application should be done once and for all. Aim the two surfaces, bond together and press. Don’t
move the bonding surfaces back and forth, or the bonding effect will be affected.
Storage:
Keep it out of touch of children and store in cool, dry and ventilated place. The storing temperature shall range from 5 - 35 Celsius, and the relative humidity shall be<80%.
Certificates:
Contact
Supplier
