Description:
Maydos SBS Adhesive KK06-L is formulated with high quality imported materials. It has good features such as easy application, rapid drying speed, powerful viscidity and ultraviolet radiation resistant after solidification, damp and aging resistant.
Advantages:
1. Environmental-friendly: Extraordinary low benzene and VOC, no hazardous materials and additives.
2. High solid content: 34% solid content, much higher than conventional adhesives, which can save adhesive
consumption by 30%-40%.
3. Freezing temperature resistant: no influence even at -15℃ to -20℃ and easy for transportation and bonding in
winter.
4. Super initial bonding power, good penetration property and fast drying speed.
5. Stable performance: moisture and water-immersion resistant after hardening, good impact resistant, which
assures long service life.
Where to Use:
Suitable for bonding materials such as plywood, board, wood floor, wallpaper, rubber, fireproof board, aluminum-plastic board and cloth, etc.
Technical Data:
Appearance: Light yellow viscous liquid
Viscosity: 55-60 ku / 30℃
300-550 MPa. S/25℃
Solids Content: 34%-36%
Shear Strength:
30 minutes: ≥0.7mpa
48 hours: ≥1.1mpa
Specific Gravity: 0.86-0.87kg/L
VOC: ≤700 g/L
Dosage: 195-250g/m2
Shlef Life:
12 months in sealed tins.
Packing Size:
0.5kg, 0.8kg, 2.2kg, 3kg, 15kg, 160kg.
Application Tools:
Brush, scraper etc.
Application Method:
1. Remove all loose or powdery paint residue by brushing and scraping with a stiff fiber brush.
2. Fill any minor cracks with an appropriate filler.
3. Surface should be flat and sanded smooth.
4. Recoat interval should be over 2 hours(depend on touch dry).
Storage:
Keep it out of touch of children and store in cool, dry and ventilated place. The storing temperature shall range from 5 - 35 Celsius, and the relative humidity shall be<80%.
Contact
Supplier