SERVOTRON® is available in the power classes 37 kW and 45 kW. Its operating pressure of 4,000 bar has been considered to be the optimum in the professional waterjet cutting sector for years.
The Austrian technical control board has confirmed that up to 24% energy can be saved with SERVOTRON® in a comparison with conventional pumps. It is available with a flow rate of 3.8 l per minute and 4.6 l per minute.
SERVOTRON® 40.37/40.45+
Drive power: 37/45kw
Operating pressure : 4,000bar
Output:3.8/4.6L/min
Equipped as standard with an oil/air cooler, SERVOTRON® saves not only money but also spares the environment. The cooler is installed in an oil catch pan which is not just one prerequisite for the CE marking but also environmentally friendly in case of leaks.
Ease of servicing is provided by the convenient pump control. The upcoming valve maintenance is displayed by temperature sensors here. Safety valve and high-pressure intensifier are installed at working height. The durable oil tank is made of aluminium: rust doesn’t stand a chance.
Two filter units keep foreign matter away from the high-pressure intensifier and prevent damage.
The pulsation damper with 2.49 l lessens pressure variations to a minimum of 140 bar and thus ensures good cuts and little wear on pipes and high-pressure components.
The SERVOTRON® high-pressure intensifier
THE SERVOTRON® CONTROL
Different analysis functions through temperature sensors (see Figure)
Master-slave function for up to three SERVOTRON® units as standard
Profibus connection with machine controller
Frequency inverter to control the servo motor
Smooth start-up to prevent current peaks
Electronic log book for industrial data recording
Contact
Supplier