PC 6511 Extra Fast Clear Coat | |||||
Characteristic: Double pack acrylic extra fast drying clear coat, easy application, good gloss, suitable for metal, solid basecoat and spot repair. Substrates: 1K basecoat | |||||
Surface Cleaning: | Clean the dust and particles with tack cloth | ||||
Mixing Ratio | Clear Coat | Hardener | |||
2 | 1 | ||||
<18°C | PC-6511 | PC-401 | |||
18-30°C | PC-6511 | PC-402 | |||
>30°C | PC-6511 | PC-403 | |||
Pot-Life at 25°C | The mixture should be used up within 1 hour | ||||
Spray Gun Set-up | Gravity Feed: 1.2-1.4mm Suction Feed: 1.3-1.5mm | ||||
Conventional: 3-4 bar RP: 2.0-2.5 bar HVLP: 2.0 bar | |||||
Coats & Thickness | 2-3 coats, total 50-70 um | ||||
Flash-off Time | At 20°C, 5-10 minutes between coats | ||||
Air-drying Time | Allow 15-20 minutes air drying time before force drying | ||||
Drying Time | Temperature | Dust Free | Dry to Handle | Dry to Polish | |
20°C | 30-40 minutes | 120 minutes | 6 days | ||
15°C | 20-30 minutes | 60 minutes | 6 days | ||
25°C | 15-20 minutes | 40 minutes | 6 days | ||
60°C | 5 minutes | 10 minutes | 80 minutes | ||
Re-coat | Sand the affected area with P2000 sandpaper where there are particles or runs after thorough drying, then polish to solve the problem. | ||||
Note | |||||
1. When temperature lower than 5°C in winter, allow a full bake at 60°C to speed up drying. | |||||
2. At ambient temperature higher than 30°C, add Retarder Solvent into thinner to avoid blushing. For details please refer to the TDS of Retarder Solvent. | |||||
3. In the event of fisheyes during application, add 0.5-1% Anti Silicon in the paint remained and re-spray the affected area. | |||||
4. In the overspray area of new and existing finish, apply directly Thinner SRA to achieve an invisible transition. For details please refer to the TDS of Thinner SRA. | |||||
5. The products mixed with hardener should be used up soon and can not restore for future use. | |||||
6. Clean equipments immediately with solvent after application. | |||||
Shelf Life: 2 years in original sealed can at cool and dry place at 20°C | |||||
Packaging: 1L/4L |
Contact
Supplier