l Fabric, Textile, Cotton, Wool, Polyester fabric, Suede/leather corduroy etc. Surface Preparation: Textile must be completely free of all contaminants including detergents and fabric softeners. To rid of contaminants, use hot water on a spin cycle. Textile must be completely dry before coating. Application: Completely saturate fabric by spray or dip application. Cure Time: About 24 hours. Cure can be accelerated with heat up to 150℃. Up to 30 washes: You have to add crosslinker and cure it under 150℃ more than 5 mins. Note: Tested up to 30 washes in ideal laboratory conditions. Recommended care is washing in hot water with no detergents or fabric softeners to keep the hydrophobic effect. If a detergent has been used, it is important to rinse fabric with hot water to restore performance of coating. |