Plastic car parts with injection molding

At Industrial man,we can make different size of exhibition models,and the surface can be made varied according to different clients.Industrial man import this kind of machine since 2015,which consists of 5-axis advanced machining centers especially designed for shipyards specific needs. A wide range of models and cutting heads enable to meet any kind of dimensional and technological requirement. The shipyards who chose Belotti's Navy machining centres incremented their constructive quality and efficiency shortly; furthermore, the quality of working environment has greatly improved, thanks to the various accessories offered with the machining center, such as effective dust suction equipments and active/passive safety systems.

●  Injection molding: 

The plastic is added to the heating barrel of the injection machine, and the plastic is melted by heat. Under the push of the screw or plunger of the injection machine, the nozzle and the mold casting system enter the mold cavity, and the plastic is hardened and shaped into an injection molded product due to physical and chemical action.
● Compression molding: 

Commonly known as press molding, it is one of the first methods of molding plastic parts. Compression molding is to directly add plastic to an open mold cavity with a certain temperature, and then close the mold, and the plastic melts into a flowing state under the action of heat and pressure. Due to physical and chemical effects, the plastic is hardened into a plastic part having a constant shape and constant shape and size.
● Extrusion molding:

A molding method for forming a continuous profile of a desired cross-sectional shape by passing a plastic in a viscous flow state through a die having a specific sectional shape at a high temperature and a certain pressure, and then at a lower temperature.
● Die casting molding:

Die casting molds are also referred to as transfer molding dies. The plastic raw material is added to the preheating feed chamber and pressure is applied to the pressure column. The plastic melts under high temperature and pressure, enters the cavity through the casting system of the mold, and gradually hardens. This molding method is called die casting and uses the mold used. It is called a die casting mold. This type of mold is mainly used for the molding of thermosetting plastics.