Recommendable advice for ozone generator operation:
1) An AV power manostat should be applied to balance the power fluctuation.
3Operation manual for OZ Series Ozone Generators
2) If the ozone generator is in leave-unused status, it should not be connect with power.
3) When ozone generator turned off, the ozone generator will shrink because of temperature bringing down,
which maybe struck water into. To prevent thus, the ozone outlet pipe should be shut off.
4) Before normally application, all pipes should be check carefully to ensure there is no air-leakage.
5) To prevent water sucked in, installing correlative facilities such as one-way valve or auto drain valve over
the air-injector by no less than 1 meter is a simple solution.
6) The air-injector should matches with the specific air flow and air pressure for different models of ozone generator.
7) Ozone generator should not be switched on and off time and again within short time.
8) The power mains for the ozone generator should be as: 220VAC, 50Hz.
9)The feeding gas should be clean and dried air with dew point of -15℃.
Contact
Supplier