PP and PE Melt Flow testing machine

Minimum:

1 set

Delivery:

15 days after order.

Country:

china

BrandName:

Package:

each set protected with resin fiber and pp film, then put into strong wooden case with operation manual and video inside.

Payment:

l/c, d/p, t/t

Price:

fob, cif

Minimum:

1 set

Delivery:

15 days after order.

Country:

china

*Send an Inquiry to this supplier

Supplier Info.

Company Name： Dongguan Hiada International Equipment CO.,Ltd

Country / Region： / China

Main Products： Tensile testing machine,environmental test chamber,bursting strength tester, Furniture testing equipment

Product Detail

PP and PE Melt Flow testing machine

Specifications

Melt Flow testing
1.Melt Flow Indexer is used to determine melt-mass flow rate .
2.High quality,melt indexer
3.Direct factory

Melt Flow testing for PP and PE

1.Melt index tester is used to determine melt-mass flow rate (MFR).
2.High quality,melt indexer

Product introduction

PP and PE Melt Flow testing machine is used to test the flowability of thermoplastic polymer under high temperature, such as polyethylene, polypropylene, pom, ABS resin, polycarbonate, nylon fluorine and other plastic polymers. The tester adopts PLC programmable controller and LCD operation platform, with single unit temperature and LED digital display.

Main parameters of machine:

Testing range: 0.1-800.00g/10min (MFR) & 0.1-800.00 cm3/10min(MVR)
Temperature range: Room temperature~400°C
Displacement accuracy: 0.01mm
Standard loads: 325g, 875g, 960g, 1200g, 1640g, 2500g, 4100, 5000g & 5000g
Combination load: 325g, 1200g, 2160g, 3800g, 5000g, 7160g, 10000g, 21600g
Material cutting method: Manual, timing and automatic cutting (optional)
Time setting: 0.1~999.9min
Cylinder: Diameter 9.5504±0.0076mm
CE certificate, Quality certificate are included

Test method:
Melt Mass-Flow Rate (MFR) & Melt Volume Rate (MVR) For Raw Material

Test Standard:
ISO 1133 – Determination of the melt mass-flow rate (MFR) and melt volume rate (MVR) of thermoplastics
ASTM D 1238-Standard Test Method for Melt Flow Rates of thermoplastics by extrusion plastometer

By Industry:
Measurement of Quality; rubber and plastics; universities; research laboratories; commodity inspection arbitration, technical supervision departments; petrochemicals; other industries.

Q1: May I know your MFI can meet our test condition 190 degree C, use 2160 g weight?
A1: Yes, our machine can be up to 400℃ and it is equipped with nine loads which can combine to the load you required

Q2: Do your universal machine be compatible for different sensors and clamps as we want to do tensile, flexural and compression test in one machine?
A2: Yes, sure. We can offer suitable clamps as per your sample size and they can be changed on one machine.

Q3: You can offer all impact weights and sample supports?
A3: For impact weight, you offer one with machine but if you require more, we can offer but we need to quote separately.
For sample supports, yes, our machine offers supports both Charpy and Izod test.

Q4: Do you have 5 stations for Pipe Hydrostatic Pressure and Burst Testing Machine?
A3: Yes, normally we offer 3 stations but we can do 5 stations for customer.

Contact

Supplier

Tell us your Buying Requirements