Specifications:
1. According the shape, it can be divided into standard brick, special-shaped brick.
2. According the model, it can be divided into ZGN, GN series, RN series, DN series and so on.
3. According the characteristic, it can be divided into low creep fireclay brick, low porosity fireclay brick etc.
Technical Data:
The physical and chemical indicators
clay refractory brick | ZCN-42 | GN-42 |
AL2O3 /% | ≥42 | ≥42 |
Fe2O3 /% | ≤1.6 | ≤1.7 |
Refractoriness /°C | ≥1750 | ≥1750 |
Apparent porosity/ % | ≤15 | ≤16 |
Cold crushing strength/ Mpa | ≥58.8 | ≥49.0 |
Refractoriness under load/ °C | ≥1450 | ≥1430 |
Reheating Linear Change(1450°C,3h)/% | 0~-0.2(3h) | 0~-0.3(3h) |
Permeability | This test must be conducted. The data of test shall be included in the quality certificate. |
Feature:
1. High refractoriness, high-temperature endurable.
2. Good thermal shock resistance.
3.Good volume stability at high temperature.
4. Good corrosion resistance.
5. Good spalling resistance and wear resistance.
6. High mechanical strength.
7. High-temperature creep rate is low.
Application:
Fireclay brick is widely used in Blast furnaces, Hot Blast Stove, Ladle lining, Reheating furnace, Cement kiln, Tunnel kiln,Boiler, Coke oven,Waste incinerators ,Carbon furnace,Glass kiln , Steel smelting furnace and various kiln lining and thermal technology equipment etc.
1.Product details
Fireclay brick Al2O3 content is 30%-48%, SiO2 content is 50%-65%, etc. Its refractoriness is 1580-1750°C, refractoriness under load is 1250-1450 °C.
It is made from flint clay clinker and binder, through high temperature sintering. and a small number of alkali metals, alkaline earth metal oxides, etc. Mineral composition is usually mullite, quartz and glass phase. with good thermal shock resistance and strong ability to resist erosion acid slag.
2.Raw Material Selection
To ensure the quality of our raw materials, we only purchase our raw materials from our long-term trusted suppliers. With every purchase, the raw material must be passed 2 times inspection, 1 time at our supplier’s site. a second inspection on the batch after the material arrived to our factory. Each time raw materials enter our facility, they are inspected again prior to being accepted.
Other products picture
Refractory ball
All typic brick
Henan LiTe Refractory Co.,Ltd is specialized in refractory.We had been in this line for more than 30 years.
The company possess independent import and export certification.We are leader in development of new technology.Our value include innovation, creativity, craftsmanship, and technical skill.We are dedicated to providing the best quality service to our customers.We will continue our efforts to be responsive to the needs
of our clients.
1.Supply:
Our company has ISO9001 quality management system certification. And the annual supply of refractory product is 80000-90000 tons.
2.Annual exports:
Now we have gained a global sales network reaching England ,United States, France, Germany, Russia, Mongolia, South Korea, Singapore,Chile,Vietnam,Pakistan, Bulgaria,Finland, Switzerland, Greece, Spain, Angola,South Africa ,and Maldives,Jordan,etc.
3.Production equipment:
Production and testing equipments are new,automated or semi-automated.Such modern equipment provide the fine technical guarantee for production quality and testing.
4.Testing equipment:
Our company's testing equipmets as follows:
High Temperature RUL Tester
Bulk Density Tester
The Pressure Tester
Refractoriness Tester
Packing
Use paper or carton layer separation between plastic shrink film protection, finally make the fumigation wooden pallets or according to your requirements.
Shipping
FAQ
Q1.What is the difference between Refractoriness and Working temperature ?
A1:Refractoriness:the refractory material withstands high temperature without melting and softening performance in the absence of load resistance.Usually working temperature is less than refractoriness about 350-400°C.
Q2.How are the products’ quality?
A2:The products will be strictly inspected before shipment, so the quality could be guaranteed.
Q3:What is the Warranty for the fire brick?
A3:For all the brick,we have 1 years warranty.If any quality problems on our side occured in this period ,we will take on the shipping cost and replacement.
Q4:Are you a manufacture or trader?
A5:To be honest we are a trader,but we have stable cooperation factories.And we can supply good pre-sale service, after-sales service.
Q5.Can we visit your company?
A6:Sure,welcome at any time,seeing is believing.
Q6. Do you provide samples?
A7:Yes, samples are available.
Q7. Do you accept OEM?
A8:Yes, we can do OEM.
Q8.What's the MOQ of trial order?
A9:No limit,We can offer the best suggestions and solutions according to your condition.
Q9.What are the payment terms?
A10:Usually T/T,but L/C,Western Union etc are available for us.
Q10. How long is delivery time?
A11:The delivery time will be determined according to the quantity of the order.
Q11.How about your company's certification?
A12:ISO9001 and Test Report,also we could apply other necessary certification.
Q12:Can we get support if we have our own market position?
A13:Please inform us your detailed mind on your market demand,we will discuss and propose helpful suggestion for you,to find the best solution for you.
Our services
Timely ! Efficient ! Quality !
1.Adhering to the business philosophy "Mutual Trust, Mutual Benefit, Mutual Profit, Faith Oriented".
2.According to your requirements to produce your order andOEM/ODM service is available.
3.Products are inspected through SGS and BV etc and accord with the international standard.
4.Your inquiry related to our products or prices will be replied in a timely manner.
Contact person:Terry Wang
Whatsapp:0086-156-3819-3057
Skape:terrywang1993
Telephone:0086-156-3819-3057
E-mail:terrywang at literefractory.com
QQ:1322553995
TradeManager:cn1512600461 Name:Terry Wang
Website:www.literefractory.com http://literefractory.en.alibaba.com
Thanks for reading our website!
Please feel free to contact us!
Have a good time!
Contact
Supplier