Rubber Temperature Humidity Test Chamber
Rubber Temperature Humidity Test Chamber
Applications
Rubber Temperature Humidity Test Chamber main to simulate test environment with different temperature and humidity for the plastic and rubber materials. And temperature & Humidity Test chamber do the Cyclic test includes climatic conditions: holding test, cooling-off test, heating-up test, moistening test and drying test…
The Cable port with flexible silicone plug for cable routing to provide the condition of test unit under operation.Uncover test unit weakness in a short-term test with accelerated time effect.
Standard Features
Item | Specification |
Internal dimension(W*D*H) | 400*500*500mm |
External dimension(W*D*H) | 600*1080*1380mm |
Temperature range | -40~+150℃ |
Temperature Accuracy | ±1℃ |
Humidity range | 20~98%R.H. (Refer Image below) |
Humidity accuracy | ±3%R.H |
Cooling speed | 1℃/min in average (without loading) |
Heating speed | 3℃/min in average (without loading) |
Internal chamber material | SUS#304 stainless steel, mirror finished |
External chamber material | Stainless steel with paint spray |
Cooling method | Air cooling |
Controller | LCD touch screen, programmable control temperature and humidity can set different parameter for cyclic test |
Insulation material | 50mm high density rigid Polyurethane foam |
Heater | Explosion-proof type SUS#304 stainless steel fins radiator pipe heater |
Compressor | France Tecumseh compressor |
Lighting | Heat resistance |
Temperature sensor | PT-100 dry and wet bulb sensor |
Observation window | Tempered glass |
Testing hole | Diameter 50mm, for cable routing |
Sample tray | SUS#304 stainless steel, 2pcs |
Safety protection device | Protection for leakage/Over-temperature/Compressor overvoltage and overload/Heater short circuit/Water shortage |
Rubber and Plastic Temperature Humidity Test Chamber
Chamber Features
Chamber Design Features
1. High performance and quiet operation (68 dBA)
2. Space-saving designed for flush installation to wall
3. Full thermal break around doorframe
4. One 50mm diameter cable port o left, with flexible silicone plug
5. Accurate wet/dry-bulb humidity measurement system for easy maintain
Programmable Controller
1. PIC controller for test chamber
2. Step types include: ramp, soak, jump, auto-start, and end
3. RS-232 interface to connect computer for output
Temp.& Humidity Range:
Contact
Supplier
