salt corrosion tester for car safety belt
salt corrosion tester for car safety belt
salt corrosion tester used for automotive door hinge , sliding door ,car seat belts and its protective layer of salt fog corrosion resistance.
Standard Parameters：
|
Model |
HD-E808-60 |
|
Internal Size (L×W×H) |
600x400x450mm |
|
External Size (L×W×H) |
1070x600×1180mm |
|
Equipment Material |
Both inside & outside shell adopt P.V.C rigid plastic board |
|
Temperature Range |
Room temperature ~ 55℃ |
|
Temperature Fluctuations |
≤±0.5℃ |
|
Temperature Uniformity |
≤±2℃ |
|
Temperature Precision |
±1℃ |
|
Spraying method |
Continuous and Periodic spray type |
|
Test Chamber Temperature |
Salt Spray Method (NSS ACSS)35±1℃ |
|
Saturated air Barrel Temperature |
Salt Spray Method (NSS ACSS)47±1℃ |
|
Brine Temperature |
35℃±1℃ |
|
Spray Quantity |
1.0~2.0 ml / 80cm2 / hr |
|
PH value |
Salt Spray Method (NSS ACSS6.5~7.2) |
|
Lab Volume |
108L |
|
Brine Tank Capacity |
25L |
|
Multiple Safety Protection Devices |
Current discharge protection, over pressure protection, over temperature protection, over load fuse protection |
|
Accessories |
Testing Salt/ Measuring tank/Nozzle Equipment x 1 set |
|
Air source |
1HP Air pump (provided by buyer) |
Contact
Supplier
