SC 1310/1550nm Singlemode Fiber Optic Attenuator
SC/UPC Single mode Optical Plug-type Attenuator, 1310&1550nm 1~25dB Optional
Fiber optic attenuators are used in fiber optic communications to reduce the optical fiber power by a certain level. The most commonly used type is female to male plug type fiber optic attenuator. It has the optical fiber connector at one side and the other side is a female type fiber optic adapter, fiber optic attenuator name is based on the connector type and the attenuation level.
The SC fiber optic attenuators consist of a male SC connector on one end and a female SC connector on the other end. When a cable end in inserted into the female end, the remaining male end can be connected to the equipment where the cable would otherwise connect directly, but providing the desired signal strength reduction. This attenuator is available in many dB attenuation values between 1dB and 25dB.
All HOLIGHT attenuators are built with the highest quality materials and factory tested to ensure precise attenuation and performance.
Product Name | SC Fixed Male to Female Attenuator | Ferrule Type | Zirconia Ceramic |
Attenuation | 1~25dB | Transfer Mode | SM/MM |
Attenuation Accuracy | 1-9dB±0.5dB, 10-25dB±10% | Operating Wavelength(nm) | 1310nm,1550nm,1310&1550nm |
Polarization Dependent Loss | ≤0.2dB | Return Loss | ≥55dB |
Humidity | 95%RH | Max Optical Input Power | 200mW |
Storage Temp Range | -40~85°C | Operating Temp Range | -40~80°C |
Contact
Supplier
