SC Series General Building Hoist

The general building hoist is being used in all kinds of applications on transporting both materials and passengers in a single or dual configuration with a payload of 300kg to 2000kg. The typical applications can be include temporary or permanent person/material lifting, new or restoration building construction, bridge and underground vertical lifting. One of the significant advantage is its Fully Safety System which configures below:

1.Overload protective device

2.Safety device

3.Safety hook

4.Top and bottom limit switch and limit cam

5.Top and bottom slow down switch

6.Top and bottom 3-phase switch

7.Limit switches of cage door, trap door, enclosure door, inspection and landing door

8.Top hitting prevention

-Single or dual operation

-Speed up to 36m/min

-Load capacity,300-2000 kg

-3 optional car sizes available

-Heavy duty brake & over speed safety

-Simplicity and low maintenance

-Light weight aluminum car & heavy weight steel frame

-Direct start-up and stop

-Optional automatic operation

>Matchineg domestic motor and worm gear reducer
>The Standard cage dimension is 3.2×1.5×2.35m,other available cage dimension(L×W×H)(m):2.5×1.3×2.35,3.0×1.3×2.35
>If in doubt, please contact the technical department of XMT

Two chinese motor

Three chinese motor

Stand electric control system

Power box