DRIVE PIN
drive pins use good quality high carbon steel as raw mateiral which meets International strandard (AISI 1060-1065) to ensure the products’ quality in high position.
MAIN POINTS
- 1. Special Steel Nailing depth: 20-30mm for concrete, 30-50mm for brick masonry, and 1-3.5mm for sheet steel
- 2. The steel nail shall be clamped with steel wire pliers for knocking, or the steel nail shall be nailed on the small wooden strip first, and then nailed into the collective. When the nail is caught by bare hands for knocking, the fingers shall be avoided to be damaged.
- 3. When special steel nails are knocked, the force shall be positive. When using a larger hammer, the knocking force shall be large and the number of knocks shall be as small as possible. The final hammering depth shall be deeper.
- 4. When nailing concrete with high grade (more than 200#), if possible, drill a hole with the depth of 1 / 5-1 / 3 of the depth of steel nailing.
- 5. Avoid flying of steel nails when knocking
Packing & Delivery
packing1 : bulk packing, 25kg/ctn
packing2 : small packing: 1kg/small box, 25boxes/ctn
packing3 : small packing:1kg/plastic bag, 25bags/ctn
packing4 : at customers' special request on weight
packing5 : with or without pallet
Delivery Details : 3-30 days after order of nail
