Characteristics: | Fast drying body filler with excellent adhesion on aluminum, steel and zinc, used with specific putty hardener, perfect for dry sanding. |
Pre-treatment | Dry and clean the substrate (aluminum, steel, zinc or epoxy primer) Not recommend to use on thermoplastic plastics, plastic primer, corrosion primer |
Mixing ratio | Putty: hardener = 100 : 2 |
Pot of life | 2-3 mins (25℃) |
Sanding | P120-P240 |
Defects preventing | Stir thoroughly before usage, and do not put the remained used putty back into the tin. Proper mixing ratio of body filler with hardener and thorough stirring is necessary to avoid cracking and limping. Not recommend to scrap too thick, scratch several coats when filling deep dents. Do not spray topcoat directly on putty, it might cause loss of gloss. Putty is flammable and explosive, do not touch with skin. |
Contact
Supplier