Single Boring Head Hinge Drilling Boring Machine for Metal-working MZ73031A

1  Determine the rotation direction of the saw blade: after connecting the power source and air source, turn on the power switch and start the switch lightly to observe whether the rotation direction of the drill bit is consistent with the marked direction;If not, turn off the power and switch any two wires, then repeat.

2  Tool calibration method: point the button to "tool calibration", place the material next to the drill bit, adjust the handwheel, and adjust the drilling depth.

3  Pressing operation: after determining the rotation direction of the drill bit, set the material in place.

4  Cutting operation: turn the button to "work", start the power switch, and automatically drill the hole with the footswitch. After cutting, loosen the foot and turn off the power.

5  Note: wear protective glasses and gloves when working.