Gears can be purchased only as a component.
1. It is the smallest design, the full range of stroke are in options.
2. Hybrid linear actuator are utilize the rotary to linear conversion.
3. From size 8 to size 34 in a wide range of force outputs, Max.
4. All stepper motor linear actuators can be customized as.
Resource:
* Hybrid Stepper Motor for a combination >>
* Carbon Brush Motor for a combination >>
* Catalog Page (PDF English 200Kb) >>
PG 13mm Gearhead Series
Housing Material | Metal | Backlash no load | Max. 2.5° |
Bearing | Sleeve Bearing | Max. force for press fits | Max. 1.5kgf |
Radial Load | Max. 0.5kgf | Radial Play | Max. 0.08mm |
Axial Load | Max. 0.5kgf | Axial Play | Max. 0.2mm |
Dimensions
Pinion Spectifications
Module | 0.25 |
Number of Teeth | 12 |
Pressure Angle | 20° |
Hole Diameter | Ø1.49 |
Motor Installation
Gearhead Data
Reduction | Absolute reduction | Max. Torque Continuous | Max. Torque Intermittent | Max. efficiency | Number of Stages | Length |
4 | 4 | 0.8kgf.cm | 2.4kgf.cm | 90% | 1 | 14.4mm |
16 | 16 | 1.2kgf.cm | 3.6kgf.cm | 81% | 2 | 18.2mm |
64 | 64 | 1.6kgf.cm | 4.8kgf.cm | 73% | 3 | 22mm |
256 | 256 | 1.8kgf.cm | 5.4kgf.cm | 65% | 4 | 25.8mm |
1024 | 1024 | 2.0kgf.cm | 6.0kgf.cm | 59% | 5 | 29.6mm |
4096 | 4096 | 2.0kgf.cm | 6.0kgf.cm | 45% | 6 | 33.4mm |
Contact
Supplier