Swimming pool pump Circulation for SUA200-Ⅰ
APPLICATION
1. Swimming Pool Circulation;
1. Irrigation of agriculture
2. Drinking water and living water
3. Garden irrigation
4. Fountains
Product parameters
Model | P1（HP） | QMAX (L/MIN) | HMAX(M) | Amps | Fitting size (mm) | weight (kgs) | Packing size (mm) |
| SUA200-Ⅰ | 2.0HP/1.5kw | 635 | 14.5 | 8 | 60.3or63 | 19 | 645*305*345 |
| SUA300-Ⅰ | 3.0HP/2.2kw | 710 | 18 | 10 | 60.3or63 | 19.5 | 645*305*345 |
| SUA400-Ⅰ | 4.5HP/3.0kw | 765 | 21 | 12 | 60.3or63 | 21.5 | 645*305*345 |
| SUA200-Ⅱ | 0.5HP/0.37kw | 635 | 14.5 | (low speed)3.0 | 60.3or63 | 18.5 | 645*305*345 |
| 2.0HP/1.5kw | (hight speed)8.0 | ||||||
| SUA300-Ⅱ | 0.75HP/0.55kw | 710 | 18 | (low speed)3.5 | 60.3or63 | 20.5 | 645*305*345 |
| 3.0HP/2.2kw | (hight speed)10 | ||||||
| SUA400-Ⅱ | 0.75HP/0.55kw | 765 | 21 | (low speed)4.4 | 60.3or63 | 22 | 645*305*345 |
| 4.5HP/3.0kw | (hight speed)12 | ||||||
| 220-240V/50HZ,110V/60HZ, models are available on request | |||||||
FEATURES
1. The efficiency is improved 25% by the permanent magnetism,direct current, brushless, non-sensor motor.
2. Adopt double plastic package for rotor and stator,motor insulation ≥300MΩ,the motor security was much improved.
3. High technique products adopting MPPT and DSP chip technique.
4. 100% copper wire, cold-rolled silicon steel sheet.
5. Stainless steel 304 & 316 shaft , motor body, screw.
PRODUCT FEATURES
① Thermal protector: single phase
② Insulation: F
③ Protection: IP55
Features
Thermal protector: single phase
Insulation: F
Protection: IP55
Working conditions
Medium temperature: 5-50℃
Environmental temperature: ≤50℃
Max.working pressure: 0.3MPa
Product applications
Contact
Supplier
