Swimming pool pump for Garden irrigation SP300
APPLICATION
1. Swimming Pool Circulation;
1. Irrigation of agriculture
2. Drinking water and living water
3. Garden irrigation
4. Fountains
Product parameters
Model | P1（HP/KW） | QMAX (L/MIN) | HMAX(M) | Amps | Fitting size (mm) | weight (kgs) | Packing size (mm) |
SP200-Ⅰ | 2.0HP/1.5kw | 520 | 18 | 7 | 60.3or63 | 17.5 | 650*305*345 |
SP250-Ⅰ | 2.5HP/1.85kw | 600 | 19 | 8.6 | 60.3or63 | 18.5 | 650*305*345 |
SP300-Ⅰ | 3.0HP/2.2kw | 635 | 19.5 | 10 | 60.3or63 | 20 | 650*305*345 |
SP200-Ⅱ | 3/8HP /0.35kw(low speed) | 250 | 3.5 | 2.4 | 60.3or63 | 18 | 665*305*345 |
2.0HP /1.5kw(high speed) | 520 | 18 | 7 | 60.3or63 | |||
SP250-Ⅱ | 1/2HP /0.4kw(low speed) | 270 | 3.5 | 2.8 | 60.3or63 | 19 | 665*305*345 |
2.5HP /1.85kw(high speed) | 600 | 19 | 8.6 | 60.3or63 | |||
SP300-Ⅱ | 5/8HP /0.45kw(low speed) | 300 | 4 | 3 | 60.3or63 | 20.5 | 665*305*345 |
3HP /2.2kw(high speed) | 635 | 19.5 | 10 | 60.3or63 | |||
220-240V/50HZ,110V/60HZ, models are available on request | |||||||
FEATURES
1. The efficiency is improved 25% by the permanent magnetism,direct current, brushless, non-sensor motor.
2. Adopt double plastic package for rotor and stator,motor insulation ≥300MΩ,the motor security was much improved.
3. High technique products adopting MPPT and DSP chip technique.
4. 100% copper wire, cold-rolled silicon steel sheet.
5. Stainless steel 304 & 316 shaft , motor body, screw.
PRODUCT FEATURES
① Thermal protector: single phase
② Insulation: F
③ Protection: IP55
Features
Thermal protector: single phase
Insulation: F
Protection: IP55
Working conditions
Medium temperature: 5-50℃
Environmental temperature: ≤50℃
Max.working pressure: 0.3MPa
Product applications
Contact
Supplier
