Swimming pool pump for Garden irrigation SUPA200-I
APPLICATION
1. Swimming Pool Circulation;
1. Irrigation of agriculture
2. Drinking water and living water
3. Garden irrigation
4. Fountains
Product parameters
Model | P1（HP/KW） | QMAX (L/MIN) | HMAX(M) | Amps | Fitting size (mm) | weight (kgs) | Packing size (mm) |
SUPB100 | 1.0HP/0.75kw | 340 | 14.5 | 3.8 | 60.3or63 | 13.5 | 635*275*380 |
SUPB150 | 1.5HP/1.1kw | 420 | 17 | 5.2 | 60.3or63 | 15.5 | 635*275*380 |
SUPB200 | 2.0HP/1.5kw | 465 | 19 | 7 | 60.3or63 | 17.5 | 635*275*380 |
SUPB250 | 2.5HP/1.85kw | 480 | 21 | 8.6 | 60.3or63 | 18.5 | 635*275*380 |
SUPB300 | 3.0HP/2.2kw | 540 | 23 | 10 | 60.3or63 | 20 | 650*275*380 |
SUPA200-I | 2.0HP/1.5kw | 465 | 19 | 7 | 60.3or63 | 19.5 | 670*275*380 |
SUPA250-I | 2.5HP/1.85kw | 480 | 21 | 8.6 | 60.3or63 | 21 | 670*275*380 |
SUPA300-I | 3.0HP/2.2kw | 540 | 23 | 10 | 60.3or63 | 22.5 | 670*275*380 |
SUPA200-Ⅱ | 3/8HP/0.35kw(low speed) | 215 | 4.5 | 2.4 | 60.3or63 | 19.5 | 670*275*380 |
2HP/1.5kw(hight speed) | 465 | 19 | 7 | 60.3or63 | |||
SUPA250-Ⅱ | 1/2HP/0.4kw(low speed) | 230 | 5 | 2.8 | 60.3or63 | 21 | 670*275*380 |
2.5HP/1.85kw(hight speed) | 480 | 21 | 8.6 | 60.3or63 | |||
SUPA300-Ⅱ | 5/8HP/0.45kw(low speed) | 250 | 5.5 | 3 | 60.3or63 | 22.5 | 670*275*380 |
3HP/2.2kw(hight speed) | 540 | 23 | 10 | 60.3or63 | |||
220-240V/50HZ,110V/60HZ, models are available on request | |||||||
FEATURES
1. The efficiency is improved 25% by the permanent magnetism,direct current, brushless, non-sensor motor.
2. Adopt double plastic package for rotor and stator,motor insulation ≥300MΩ,the motor security was much improved.
3. High technique products adopting MPPT and DSP chip technique.
4. 100% copper wire, cold-rolled silicon steel sheet.
5. Stainless steel 304 & 316 shaft , motor body, screw.
PRODUCT FEATURES
① Thermal protector: single phase
② Insulation: F
③ Protection: IP55
Features
Thermal protector: single phase
Insulation: F
Protection: IP55
Working conditions
Medium temperature: 5-50℃
Environmental temperature: ≤50℃
Max.working pressure: 0.3MPa
Product applications
Contact
Supplier
