Swimming pool pump for Garden irrigation SWIM050
APPLICATION
1. Swimming Pool Circulation;
1. Irrigation of agriculture
2. Drinking water and living water
3. Garden irrigation
4. Fountains
Product parameters
Model | P1（HP/KW） | QMAX (L/MIN) | HMAX(M) | Amps | Fitting size (mm) | weight (kgs) | Packing size (mm) |
SWIM050 | 1.0HP/0.75kw | 340 | 12.5 | 3.8 | 48.5or50 | 19.5 | 560*275*390 |
SWIM075 | 1.2HP/0.9kw | 370 | 15 | 4.6 | 48.5or50 | 21 | 560*275*390 |
SWIM100 | 1.5P/1.1kw | 390 | 17.5 | 5.8 | 48.5or50 | 22.5 | 560*275*390 |
SWIM150 | 2.0HP/1.5kw | 470 | 18.5 | 7 | 48.5or50 | 23 | 560*275*390 |
220-240V/50HZ,110V/60HZ, models are available on request | |||||||
FEATURES
1. The efficiency is improved 25% by the permanent magnetism,direct current, brushless, non-sensor motor.
2. Adopt double plastic package for rotor and stator,motor insulation ≥300MΩ,the motor security was much improved.
3. High technique products adopting MPPT and DSP chip technique.
4. 100% copper wire, cold-rolled silicon steel sheet.
5. Stainless steel 304 & 316 shaft , motor body, screw.
PRODUCT FEATURES
① Thermal protector: single phase
② Insulation: F
③ Protection: IP55
Features
Thermal protector: single phase
Insulation: F
Protection: IP55
Working conditions
Medium temperature: 5-50℃
Environmental temperature: ≤50℃
Max.working pressure: 0.3MPa
Product applications
Contact
Supplier
