Temperature Humidity Chamber With PLC Controller

Temperature Humidity Chamber With PLC Controller

Our engineers are equipped with the latest control system for temperature humidity test chamber.PLC (Programmable Logic Controller) controller can programmable control temperature and humidity value and cyclic test as you set the different parameter.this temperature humidity chamber can temperature and humidity test,holding test, cooling-off test, heating-up test, moistening test and drying test ... for all of products.Actually Laboratory, Scientific Research, QC department will use this equipment to test the quality of products meet the standards and customer testing requirements.

Advantage:

1. Temperature range： -70~+150℃

2. Humidity range: 20~98%RH (Refer Image )

3. Cooling speed: 1℃/min in average (without loading)

4. Heating speed: 3℃/min in average (without loading)

5. Internal chamber material: SUS#304 stainless steel, mirror finished

6. High performance and quiet operation (68 dBA)

Experimental space volume:
100L/150L/225L/408L/800L/1000L (can be customized)

Application Details:

1. To simulate test environment with different temperature and humidity

2. Cyclic test includes climatic conditions: temperature and humidity test,holding test, cooling-off test, heating-up test, moistening test and drying test…

3. Cable port with flexible silicone plug for cable routing to provide the condition of test unit under operation

4. Uncover test unit weakness in a short-term test with accelerated time effect

Application industry (not limited to the following):

1. electronic, electrical, mobile, data

2. communication, instrumentation, vehicle parts

3. Plastic products, metal, food

4. Chemistry, building materials, medical treatment

5. Space and other products to detect the quality of use

Test standard(including but not limited to... ):

Compliance with ASTM G53-77 specifications GB, GJB, MIL, ASTM, CNS, IEC, JIS, AATCC, DIN, Fed Test, BS and SAE.

Standard Features:

1. Internal dimension (W*D*H) ——400*500*500mm

2. External dimension (W*D*H)—— 900*1070*1400mm

3. Temperature range ——-70~+150℃

4. Temperature fluctuation ——±0.5℃

5. Temperature uniformity ——2℃

6. Humidity range ——20~98%RH (Refer Image below)

7. Humidity fluctuation—— ±2.5%RH

8. Humidity uniformity—— 3%RH

9. Cooling speed—— 1℃/min in average (without loading)

10. Heating speed ——3℃/min in average (without loading)

11. Internal chamber material—— SUS#304 stainless steel, mirror finished

12. External chamber material—— Stainless steel

13. Cooling method—— Air cooling

14. Controller LCD touch screen, programmable control temperature and humidity

Can set different parameter for cyclic test

15. Compressor—— France Tecumseh compressor x 2sets

16. Lighting ——Heat resistance

17. Observation window——Tempered glass

Chamber Design Features:

1. High performance and quiet operation (68 dBA)

2. Space-saving designed for flush installation to wall

3. Full thermal break around doorframe

4. One 50mm diameter cable port o left, with flexible silicone plug

5. Accurate wet/dry-bulb humidity measurement system for easy maintain

Programmable Controller-LCD Touch Screen:

In order to control temperature and humidity more accurately, our engineers use intelligent programming controller for the climate chamber, on the one hand can better control the temperature and humidity changes in speed and degree of accuracy. On the other hand, you can simplify the procedure. As long as you set the temperature value, humidity value and test time of the test, the climate chamber can intelligently complete the test and multiple cycle testing. The Intelligent programming controller can display data change trend chart, maximum value, lowest value and so on, and can implement multiple detection data contrast. Automatically saves data and prints test results.

1. PLC controller for test chamber

2. Step types include: ramp, soak, jump, auto-start, and end

3. RS-232 interface to connect computer for output

Our Services：

If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-conference. If customers require on-site service, the transport and travel expense shall be borne by customer.

1. Pre-service

   --24 Hours online service for your consult.

   --Help choose right model,and a series of service,person,advise.

2. Middle service

    --Give you best offer

    --Provide discount for many sets order

    --Do customer's request:

    --Choose payment term you convienent.

    --Promptly production and delivery,inform you in time.

    --Can provide invoice value as you like to decrease your tax.    

3. After sale service ：

   --1 year warranty service and all life maintenance.

   --Technical Egineer are avalible for oversea trainning.

   --Free change for some parts

   --Remote control technical consult

   --Free installation DVD

   --Maintenance plan

4,Commitment:

   We will sign a letter of commitment while we sign the contract, which will improve your confidence to us.

5,Good Packaging:  

  Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.