textile salt corrosion test chamber
product introduce:
textile salt corrosion test chamber is used to test the corrosion resistance of all kind of textile or fabric.
Standard Parameters
|
Model |
HD-E808-60 |
|
Internal Size (L×W×H) |
600x400x450mm |
|
External Size (L×W×H) |
1070x600×1180mm |
|
Equipment Material |
Both inside & outside shell adopt P.V.C rigid plastic board |
|
Temperature Range |
Room temperature ~ 55℃ |
|
Temperature Fluctuations |
≤±0.5℃ |
|
Temperature Uniformity |
≤±2℃ |
|
Temperature Precision |
±1℃ |
|
Spraying method |
Continuous and Periodic spray type |
|
Test Chamber Temperature |
Salt Spray Method (NSS ACSS)35±1℃ |
|
Saturated air Barrel Temperature |
Salt Spray Method (NSS ACSS)47±1℃ |
|
Brine Temperature |
35℃±1℃ |
|
Spray Quantity |
1.0~2.0 ml / 80cm2 / hr |
|
PH value |
Salt Spray Method (NSS ACSS6.5~7.2) |
|
Lab Volume |
108L |
|
Brine Tank Capacity |
25L |
|
Multiple Safety Protection Devices |
Current discharge protection, over pressure protection, over temperature protection, over load fuse protection |
|
Accessories |
Testing Salt/ Measuring tank/Nozzle Equipment x 1 set |
|
Air source |
1HP Air pump (provided by buyer) |
Product Features
1, Durable hard 8 mm PVC construction, anti-corrosion and easy to clean.
2, Reservoirs with mixing system on stand.
3, Separate heating system apart from salt testing chamber to ensure accurate result and protect circuit.
4, Exposure zone lined with corrosion-resistant PVC sheets.
5, Clear cover allows viewing of test conditions.
6, Peaked cover prevents dripping of condensation onto samples.
7, Water seal and water level protection system.
8, Heated humidifying tower with air relief valve, adjustable tower tip to orient salt fog.
9, Automatic DI water fills to humidifying tower.
10, Digital temperature control.
11, Integral over-protection on heaters.
12, Low water cut-off protection on humidifying tower.
product view:
Contact
Supplier
