ULT separator machine for LCD repair, rework, refurbishment, recycling LXPB-490*380

Frozen separator machine, LCD/OLED freezing separator with minus 160/180 degrees, LCD/OLED freezer separator, Samsung LCD/OLED freezer separator, 

Broken screen freezing separation, High ambient temperature resistant LCD freezer separator, On-board screen freezing separation, 

Mobile phone screen freezer separation, Mobile phone glass is separated from the LCD/OLED, Ultra-low temperature refrigerator, 

Plate screen/Laptop freezing separation, 13/17/17.3/18 inch freezer separator

PRODUCT FEATURES                                    

LXBX series ultra-low temperature separator machine is a 

high-tech product which was independently designed and 

developed by Lixang Refrigeration Equipment Co., Ltd.

It is very suitable for various sizes of mobile phones' LCD repair, recycling, refurbishment, rework, etc. 

The lowest temperature of the machine can reach up to -180℃ without using liquid Nitrogen as refrigerant. 

It can easily separate out glass, TP, backlight, OCA, LOCA, bracket from damaged LCD module. No need to change the polarizer film.

High efficiency. No components damage during the LCD module separating process.

It is really a good helper for the LCD reparation industry.

Operation Instructions:

1.) Before using, it will take the machine around 30～40 minutes to 

cool to the set working temperature.

2.) Place the LCD screen on the frozen plate.

3.) Freezing time from 30 seconds to 1 minute depends on different LCD screens.

4.) Take out LCD screen and separate it.

5.) Below is the URL of youtube video link for your reference:

 https://www.youtube.com/channel/UCpXgF19dgOMtxk4wz49-yBw

Tips:

1. For serious crushed glass, please stick a tape on glass for safety and good for machine.

2. Please make sure the operator wears gloves in case of danger.

3. It is much easier to separate out the bracket and other components after freezing processing. Please pay attention to the backlight water inlet.

4. After separating the LCD screen, pay attention to the water treatment and temperature recovery.

5. When separating the curved screen, the separation risk caused by the temperature difference between 2 sides of the curved surface 

LCD screen. Please pay more attention to this point.

6. After LCD separation, please put the glue side upward to avoid sticking on the article surface after the temperature return to the normal.

                                                                              PRODUCT APPLICATION

Suitable for Photoelectric manufacturer, LCD production enterprises, Mobile phone steel film production enterprises, Mobile maintenance industry.

                   

Super thick heat insulation layer box body + double sealing treatment door, good thermal insulation performance

                   

++

                   

Imported high precision microcomputer temperature controller, precise temperature control

                   

++

                   

Imported advanced dual-frequency compressor, more stable refrigeration performance

                   

++

MAINTENANCE

◆ Do not place heavy objects on the door or cover of cryogenic refrigerator to avoid compression deformation

◆ When receiving the machine, leave it for 2-5 hours before power on and start up. When using, just press the switch after power on

◆ After starting up, the first three minutes are the compression protection time, and the compressor will start after three minutes

◆ Every once in a while, the cryogenic refrigerator should be cleaned and maintained and dust cleaned