Dyed Film:
Ø Key Features:
ALILULA window film are upgrade films that use clear optical and magnetron sputtering technology to
reduce a range of problems such as glazing, heat and glare reduction, thermal insulation, UV filtration
and corrosion.
Ø Unique Advantage:
1,Control more than 99% harmful UV rays, Isolate 90% of heat source, IR fom sun;
2,Isolate 99% of UV rays that cause fading the trims and interior car accessories;
3,High Transparency by 73% allowing light to pass through;
4,Prevent glare from the sun, which given a sense of comfort while driving;
5,Three Brand for you to choose: Carty-series, MG-series, and Van Gogh-series;
Technology : Metal Coating (hard coating) Processing; Ø Physical Data: Visible Light Transmission: 1%--35% Visible Light Reflection: Int: 5.2-7.8/Ext:7.4-10.4 Infrared Rejection: 10%---90% UV Rejection: 98%--99% Thickness Available: 1.5mil, 2mil, 4mil, 8mil Width Available: 50cm, 75cm, 90cm, 100cm, 1.52m Length Available: 1m, 3m, 6m, 12m, 30m, 60m ,300m,600m,1200m Packing (rolls/ctn): Big roll: each one with single box packing; small roll: each one with cubic box, then 50-120 rolls in one carton. 1. Clean the glass thoroughly with detergent and water .leave no spots or dirty on it . 2. Cut your Solar Film (catch release film )to the shape of and larger size than the glass (each side extruding some or 1/4) 3. At one corner of your solar film ,apply a small piece of adhesive tape to each side ,pulling apart ,your solar film 4. Squeeze out the water in between your solar film and the glass with squeegee.
Raw Material: Optical PET as raw mateial;
Components: Senior Metal as aluminium and IR Chemical Agent.
(DIFFERENT!)
ØHow Window Film Works?
(Black,Green,Blue, Olive)
ØInstallation Instructions:
can be easily separated from the release film .Spray water to the adhesive side of your tint solar film whilst the film
are being separated.
Contact
Supplier