Program and erase the code:
a. Program: short press the learn button on the controller, LED on the controller lights on, press any button on the remote, LED on the controller flash, means program successfully.
b. Erase the code: keep pressing the learn button of the controller, after 3 seconds, led indicator will flash 3 times continuously, means all learnt remote controls have been erased successfully.
Brand | Daylightrf® |
Model number | DL-CS1019LT |
Power supply | 12VDC, 24VDC, 220VAC-240VAC |
Operating Current | 12.4 mA @ +10 dBm |
Current | 1A |
Channel | 1 ch |
Remote control | DL-4003, DL-4004, DL-4005 |
distance | 30-300m depends |
Lifespan | 10 - 30years |
Modulate mode | ASK/OOK |
Lifespan | 10 - 30years |
Mininum timer | 0 second |
Maximum time | 999 hours |
LED display | include |
Time delay | 0~999, unit: second, minute, hour |
Operating frequency | 315MHz, 433.92MHz, customized frequency available |
Decode | Fixed code(2260, 2262)/Learning code(2240/1527) |
Learn remote | 20 pcs |
Remote control | A-ON, B- stop, C-recycle, D- stop |
Manual switch | Recycle / OFF / ON |
Case dimension | 106x45x26mm |
MOQ | 500 pcs |
Lead time | 15-20working days or negotiable |
Port of loading | Shenzhen, China |
Payment terms | Paypal, Western Union, T/T or negotiable |
a. Setting of recycle and display: press the SET button, LED displays ON, 1 second later, it will go automatically to the setting of ON time, now we can press UP or DN to choose the ON recycle time value we want. Press SET button again, LED displays OFF, 1 second later, it will go automatically to the setting of OFF recycle time, now we can press UP or DN to choose the OFF recycle time value we want. Keep pressing UP or DN can choose the value quickly.
b. Count down display: under the recycle status, LED displays the count down time. We can double check the setting value through pressing the SET button. During the count down display, we still can adjust the value through UP or DN button, the adjustment base on original setting value.
c. The start button(A & B button) can’t trigger the time delay again once the count down starts, if need to revise the original setting, pls stop the power supply and re connect, and repeat the setting as step 4-a.
d. The controller will go to the original setting once we change the unit of second, minute or hour.
·BY EXPRESS
By Express(DHL, UPS, TNT) is door to door service. Customer just need to wait for the packages in the office.
·BY AIR
By air is door to airport service. Customer should pick up the goods from the airport by himeself.
·BY SEA
By sea is door to port service. Customer should arrange the transportation from port to the office.
Contact
Supplier
Computer Hardware & Software
Electronic Cigarettes
Camera, Photo & Accessories
Home Audio, Video & Accessories
Mobile Phone & Accessories
Portable Audio, Video & Accessories
Blockchain Miners
Chargers,Batteries & Power Supplies
Mobile Phone Parts
Presentation Equipment
Smart Electronics
Earphones & Accessories