Reverse osmosis system:
Reverse osmosis removes dissolved salt ions from water by concentrating
them.The reverse osmosis system mainly consists of high pressure pump,
reverse osmosis membrane, instrument and pipe.
Each has its own high pressure pump, instrument and other monitoring devices
, the system with shutdown flushing function, that is, after each stop to reverse
osmosis membrane rinse, to prevent the ions in the water due to high concentration
and deposition on the membrane surface.
4. System control points:
Automatic control
Automatic operation of the system equipment, operating parameters can be
displayed in the automatic control cabinet.
Water pump and motor protection
All motors are protected by inlet current overload and undervoltage.
High-pressure pump high-pressure discharge/stop/alarm
When the high pressure pump outlet pressure is higher than the maximum allowable
value, reverse osmosis will automatically stop and give the high pressure pump alarm
indicator signal. The operator will restart after solving the problem to avoid damage to
the membrane and pressure vessel caused by high pressure pump outlet pressure.
Reverse osmosis system shut down automatic membrane flushing reverse osmosis
membrane cleaning
The reverse osmosis system will wash the reverse osmosis membrane automatically
when the system is shut down to avoid dirt deposition.
The tank level control system starts and stops
The water level of the water tank is controlled at three points to realize the automatic
control of the whole system.
Contact
Supplier