50W 500/650/700/850/1000/1050/1200mA Constant Current DMX Driver IP1WMC-50M-0
Feature
1. Single channel output, output current level selectable by DIP S.W.
2. Support DMX512(1990)
3. Support RDM function
4. Wide input voltage of 100VAC~400VAC
5. High efficiency up to 88%
6. Built-in active PFC function
7. Dimming effect smooth, no flicker
7. Protections: Short circuit, over load
8. Suitable for indoor LED lighting application, such as down light, panel light, and so on
Technical Parameter
Model | IP1WMC-50M-0 | ||||
Output | Current | 500mA | 650mA | 700mA | 850mA |
Voltage | 9-65VDC | 9-65VDC | 9-65VDC | 9-59VDC | |
Power | 32.5W | 42.2W | 45.5W | 49.3W | |
Current | 1000mA | 1050mA | 1200mA | ||
Voltage | 9-50VDC | 9-48VDC | 9-42VDC | ||
Power | 50W | 50.4W | 50.4W | ||
Current Accuracy | ±5% | ||||
No load output voltage | 90VDC | ||||
Output LF current ripple(< 120 Hz) | ＜3% | ||||
Channels | 1 | ||||
Input | Voltage | 100– 240VAC | |||
Frequency | 50/60Hz | ||||
Current | 0.26Amax@230VAC | ||||
Power factor | ≥0.9@230VAC,full load | ||||
Efficiency | 88%@230VAC,full load | ||||
Inrush Current | Cold start,15A(twidth=22us measured at 50% Ipeak) @230VAC | ||||
THD | <10%@230VDC, full load | ||||
Protection | Short Circuit | Shut down the output, recovers automatically after fault removed | |||
Over Load | Hiccup, recovers automatically after fault removed | ||||
Function | Dimming | DMX512/RDM | |||
Others | Dimension | 137*82*31 mm（L*W*H） | |||
G.W | 220g | ||||
Working temp. | -20℃ ~ 50℃ | ||||
Relative humidity | 20~90% RH | ||||
Contact
Supplier
