Note: This technical parameter is measured under working conditions: outdoor dry bulb temperature 20 ° C, inlet water temperature 15 ° C, outlet water temperature 30 ° C measured
If the parameters of the purchased components are inconsistent with this table, the nameplate of the purchased unit shall prevail.
Air Source Swim Pool Heat Pump Water Heater
Quotation:
offshore fob
Port:
huangpu port, guangzhou
Date of delivery:
60 or 90 days
Payment:
tt
Deposit/delivery order:
tt
Quotation:
offshore fob
Port:
huangpu port, guangzhou
Date of delivery:
60 or 90 days
Supplier Info.
Registration Date：
1999
Country / Region：
guangdong / China
City：
foshan
Main Products：
Air Source Heat Pump Water Heater,Heat Pump Dryer,heat pump manufacturers
Product Detail
REVERSE CARNOT CYCLE THEORY
1. The refrigerant suddenly drops to -20*C after the pressure is released. When the ultra-low temperature liquid refrigerant enters the absorption evaporator, it encounters about 20*C air passing through the air heat transfer (temperature difference: 40'C), and the ultra-low temperature refrigerant absorbs After the heat to the air, the temperature rises to 20C;
2. The refrigerant with a temperature of 20C enters the high-temperature compressor and is heated and pressurized, and then becomes a high-temperature high-pressure 80C gas-state discharge compressor to enter the heat exchanger.
3. The temperature at 80C vaporized refrigerant transfers heat energy to the low-temperature cold water in the heat exchanger, so that it becomes about 60C. The domestic hot water is pumped into the insulated water tank for storage and use, and the high-temperature refrigerant is released after heat release. It becomes a high pressure liquid.
4. The high-pressure liquid refrigerant is throttled and depressurized by the expansion valve and then becomes a low-pressure liquid state, so that it enters the evaporator to absorb heat again;
5. According to the reverse Carnot cycle principle, the compressor is continuously and repeatedly cycled. The whole process is the process of heat transfer. As long as the compressor is operated with one degree of electricity, it can absorb from the air to the equivalent of 3 degrees to 6 degrees. The heat generated is transferred to the water, and the energy saving and safety effects are very obvious.
Family use air heatpump
Pool machine connection diagram
Parts introduction
Introduction to compressor
American imported brand gulun scroll compressor, high energy efficiency is more than 12% higher than the general piston compressor, good reliability, liquid impact resistance, high tolerance of impurities, low noise, small vibration.
Sheet metal shell introduction
1.2-1.5 thick anticorrosive steel plate with strong ability of preventing salt alkali and acid is used. Outdoor protective coating is sprayed on the surface to make it beautiful and good-looking.
Fan introduction
Iron case iron wind blade waterproof copper wire motor, with quiet, stable air volume, less vibration, eliminate the plastic fan blade rupture, deformation risk.
Introduction to evaporator
Hydrophilic, corrugated aluminum Bernstein and internal screw copper tube heat exchanger. High heat transfer efficiency and durability. The hydrophilic property makes the condensed water on the heat exchanger drain away quickly.
Introduction to fluorine circuit and valve
Fluorine valve body adopts Japanese heron palace, Emerson throttle valve, accurate opening, little leakage, ultra-low failure rate! All fluorine welding joints are welded with 5% silver solder, good toughness, strong welding joints, no cracking.
Introduction to circuit breakers and relays:
All circuit breakers, relays are imported from Korea LS electrical appliances, good quality, long service life
Introduction of screws
All fasteners are made of 304 stainless steel screws, never rust, easy to maintain high grade and beautiful folding!
Introduction to chassis
Each product adopts channel steel Qi whole welding, surface spraying outdoor protective coating, solid and firm, durable.
Introduction to electronic control system
Independent development, production of electronic control system, complete functions, easy maintenance. With timing, backwater, electric heating, defrosting, with solar energy and other functions, no external control box
Condenser (titanium tube)
It is made of space metal-titanium tube, with strong anticorrosive ability, and can be operated for a long time under water quality including acid, chlorine and sea water.
Specification
| Unit Type | PAKA-130C | PAKA-180C | PAKA-330C | PAKA-650C | PAKA-750C | |
| Rated hot water(L/h) | 550L/h | 860L/h | 1400L/h | 3000L/h | 3400L/h | |
| Rated power (KW) | 1.6kW | 2.5kW | 4.2kW | 8.8kW | 10kW | |
| Rated current (A) | 8A | 12A | 8A | 15.5A | 18A | |
| Rated heating capacity (KW) | 7KW | 11KW | 18.5KW | 30KW | 45KW | |
| Maximum power (KW) | 2kW | 3.5kW | 5.5kW | 10kW | 13.5kW | |
| Maximum current (A) | 10A | 15A | 8.8A | 17A | 24A | |
| Rated water temperature | 30℃ | 30℃ | 30℃ | 30℃ | 30℃ | |
| Maximum water temperature | 35℃ | 35℃ | 35℃ | 35℃ | 35℃ | |
| Power supply | 220V/50Hz | 220V/50Hz | 380V~3N/50Hz | 380V~3N/50Hz | 380V~3N/50Hz | |
| Anti-shock level | Class I | Class I | Class I | Class I | Class I | |
| Protection level | IPX4 | IPX4 | IPX4 | IPX4 | IPX4 | |
| Exhaust side maximum working pressure | 2.4 MPa | 2.4 MPa | 2.4 MPa | 2.4 MPa | 2.4 MPa | |
| Exhaust side minimum working pressure | 0.05 MPa | 0.05 MPa | 0.05 MPa | 0.05 MPa | 0.05 MPa | |
| Host quality | 60Kg | 135Kg | 180Kg | 450Kg | 450Kg | |
| Dimensions | Length | 500mm | 685mm | 850mm | 1210mm | 1210mm |
| Width | 500mm | 670mm | 820mm | 900mm | 1080mm | |
| Height | 650mm | 860mm | 1035mm | 1140mm | 2000mm | |
| Host takeover size | DN20 | DN25 | DN25 | DN40 | DN40 | |
| External water pipe connection size | DN25 | DN32 | DN40 | DN50 | DN50 | |
| Unit rated circulating water (cubic) | 6-8 | 8-12 | 10-15 | 18-24 | 18-24 | |
| Unit pump rated lift | 10 | 10 | 12 | 15 | 15 | |
| Tap water pressure | ≤0.6 MPa | ≤0.6 MPa | ≤0.6 MPa | ≤0.6 MPa | ≤0.6 MPa | |
| Grounding requirements | ≤10 Ω | ≤10 Ω | ≤10 Ω | ≤10 Ω | ≤10 Ω | |
| Ambient temperature | 5-25℃ | 5-25℃ | 5-25℃ | 5-25℃ | 5-25℃ | |
| Noise | ≤52dB(A) | 54dB(A) | 56dB(A) | 60dB(A) | 60dB(A) | |
Show details
Widely used in: hotel, dormitory and other shower hot water and heating constant temperature supply, and the industrial field of electroplating, slaughtering, drying and other industries hot water and constant temperature needs.
Contact
Supplier
Contact us
Tell us your Buying Requirements
You Might Also Like
