REVERSE CARNOT CYCLE THEORY
1. The refrigerant suddenly drops to -20*C after the pressure is released. When the ultra-low temperature liquid refrigerant enters the absorption evaporator, it encounters about 20*C air passing through the air heat transfer (temperature difference: 40'C), and the ultra-low temperature refrigerant absorbs After the heat to the air, the temperature rises to 20C;
2. The refrigerant with a temperature of 20C enters the high-temperature compressor and is heated and pressurized, and then becomes a high-temperature high-pressure 80C gas-state discharge compressor to enter the heat exchanger.
3. The temperature at 80C vaporized refrigerant transfers heat energy to the low-temperature cold water in the heat exchanger, so that it becomes about 60C. The domestic hot water is pumped into the insulated water tank for storage and use, and the high-temperature refrigerant is released after heat release. It becomes a high pressure liquid.
4. The high-pressure liquid refrigerant is throttled and depressurized by the expansion valve and then becomes a low-pressure liquid state, so that it enters the evaporator to absorb heat again;
5. According to the reverse Carnot cycle principle, the compressor is continuously and repeatedly cycled. The whole process is the process of heat transfer. As long as the compressor is operated with one degree of electricity, it can absorb from the air to the equivalent of 3 degrees to 6 degrees. The heat generated is transferred to the water, and the energy saving and safety effects are very obvious.
Introduction to compressor
Panasonic original compressor, good performance, long service life, wear resistance, high energy efficiency, high heat production.
Sheet metal shell introduction
1.2-1.5 thick anticorrosive steel plate with strong ability of preventing salt alkali and acid is used. Outdoor protective coating is sprayed on the surface to make it beautiful and good-looking.
Introduction to evaporator
Hydrophilic, corrugated aluminum Bernstein and internal screw copper tube heat exchanger. High heat transfer efficiency and durability. The hydrophilic property makes the condensed water on the heat exchanger drain away quickly.
Introduction to fluorine circuit and valve
Fluorine valve body adopts Japanese heron palace, Emerson throttle valve, accurate opening, little leakage, ultra-low failure rate! All fluorine welding joints are welded with 5% silver solder, good toughness, strong welding joints, no cracking.
Introduction to electronic control system
Independent development, production of electronic control system, complete functions, easy maintenance. With timing, backwater, electric heating, defrosting, with solar energy and other functions, no external control box.
Condenser (shell and tube)
The shell and tube condenser has the advantages of small volume, full heat exchange of water and fluorine, high heat exchange efficiency and strong anti-ice heave ability.
Small air energy hot water machine connection | |||||||||
Neutral line | Fan | Neutral line | Water supply valve | Water supply pump | Circulating pump | Low water level switch | High water level switch | ||
N | 14 | N | 12 | 13 | 15 | 4 | 3 | 2 | 1 |
01 Upper circulation tube | 02 Circulating pump | 03 Water tank probe | 04 Water tank copper rod |
05 Y filter | 06 Lower circulation tube | 07 Return water solenoid valve | 08 Water supply solenoid valve |
09 Return pipe | 10 Cold water pipe | 11 High water level | 12 Low water level |
13 Water supply pipe | 14 Electronic pressure switch | 15 Water supply pump |
Widely used in: household shower hot water supply
Contact
Supplier