Countertop processing production line

The production line is mainly used for deep processing of the table plane, including raw material cutting machine cutting, water jet cutting edge cutting, edge chamfering machine processing straight edge bevel forming, circular arc chamfering processing small arc edge, side profile polishing machine processing Various shaped edges (including French edge, round edge, duckbill edge, etc.), 45-degree cutting of Siamese trimmer, 45-degree beveling of chamfering machine, grinding of viscose on plate, CNC machining of forming and polishing center. The layout of the production line is reasonable, the equipment is highly automated, the technology is mature, the technology is advanced, the quality is reliable, and the operation is safe and environmentally friendly. Friendly.

Bridge saw - Waterjet - Machining Center Production Line1

Bridge saw - Waterjet - Machining Center Production Line2

5-axis waterjet

Five-axis waterjet section: Two waterjets are equipped with one operator and one upper and lower plate auxiliary staff. The workers pull the board to be cut from the stick wire rack to the water cutting platform for processing, and then pull back the stick line after processing. After the next process, since the six bridges supply two waterjets, materials that cannot be processed can be stored in the raw material storage area. Capacity calculation: Take a 625×330 square hole and a ?30 round hole in the middle of a panel of 2400×600×20 panels as an example. The cutting time is 2.5 minutes (cut quartz stone speed 0.8m/min), and the upper and lower plates and positioning time is 3.5 minutes. 10 pieces per hour.

YD-3020A 5-axis bridge cutting machine

Cut-off part of the bridge: Every two bridge cutters are equipped with a single-arm crane and an operator. The operator of the bridge cutter is responsible for the loading and lifting of the sheet material. The sheet is sucked from the A-frame and rotated into a horizontal position. , It is transported to the upper brick roller bar frame of the bridge cutter, and the line frame conveys the plate to the bridge cutter for cutting. After cutting, the plate is sent to the caster sorting platform through the lower brick conveyor belt. Each two platforms is equipped with a picker. The picker pushes the cut sheet to the stick wire rack. The stick wire rack that runs through the rectification production line brings the sheet to each corresponding station. This section is equipped with 6 production staff. Capacity calculation: Taking a large board with dimensions of 3600×1600×20 and 600×600×20 size boards as an example, each large board can open 10 pieces, with a time of 9 minutes (cut quartz stone speed of 3.5m/min), and the time of the upper and lower plates is approx. 6 minutes. That is, 40 specifications plates are produced per hour. Calculated on a daily basis of 8 hours, 300 days a year, each machine's annual production capacity is 34,000 square meters.

CNC machining center

CNC machining center part: This part of the four machines are equipped with a total of four staff, one person a machine, the operator will be on the stick wire rack processing center processing sheet pulled down, remove the glue when the fixed clip, and the plate is fixed In the machining center table, the rods are pulled back to the packaging area after the processing is completed. Materials that are too late to be processed can be stored in raw material storage areas. Single-machine capacity calculation: Calculated with 2400×600×20 panels (opened square hole), edging and polishing a 2400mm edge, two 600mm edges, and a 625×330 square hole. Processing time: 15 minutes, upper and lower plates and positioning time 5 minutes, 3 pieces per hour.

                   

bevel cutting

 

                   

ceramics and stone

 

                   

composite materials

 

                   

glass

 

 

                   

Wood

 

                   

metal

 

                   

precision cutting

 

                   

thickness

 

 

Foshan Machinery and Equipment Association vice president unit

Guangdong Private Technology Enterprises

high-tech enterprises1

International iso certification

Apply unique oil immersion lubrication

Top 10 Most Competitive Companies in Machinery Industry

5-axis waterjet

CNC machining center

YD-3020A 5-axis bridge cutting machine Intelligent lifting plate device

European customer CNC machining center table panel processing

Indian customer engraving machine table panel processing

Turkish customer's bridge cut deck processing

U.S. customer waterjet decking

Q Are you a factory or a trading company?

A: We are factories.

Q Can you build automatic processing lines to meet my special requirements?

A: Yes, our R & D team can design custom models according to your specific requirements.

Q: Did you test all waterjet before delivery?

A: Yes, we have 100% test before shipping.

Q How is the machine's packaging?

A: All of the fuselage are plastic film packaging to meet the container loading requirements.

Q: How to control the quality of your factory?

A: Quality is the top priority. Always attach great importance to quality control. Most of
our machines have CE certification.

Q What is your delivery time?

A: 30-60 days after receipt of deposit.

Q: What is your packaging terms?

A: Each machine is wrapped in a plastic film to protect it from moisture and dust duringtransport, and then sealed into a strong, plywood shipping container for the sea. All packaging materials are in line with ISPM standards, fumigation-free.

Q: What is your payment period?

A: We may ask for a prepayment when the order is confirmed. Once your waterjet is ready for delivery, we will test your machine to prepare videos and photos for your approval. After that we ask for the balance to be paid.

Q: Where is your factory?

A: Our factory is located in Foshan City, Guangdong Province, China. Close to Guangzhou(about 40 minutes by car) and Hong Kong (by ferry for 2 hours). Convenient transportation.
We warmly welcome customers at home and abroad throughout the visit!

Q: Your price is the lowest in the market?

A: No. When you compare our prices with other suppliers, we do not intend to guarantee the cheapest machines. However, at the price you accept, we do promise to offer the most reliable and reasonably priced waterjet as well as profitable and trouble-free business.