APM-10W | |||||||||||
Model | AD-S0520B | AD-S07512B | AD-S0910B | AD-S1208B | AD-S1506B | AD-S1805B | AD-S2405B | ||||
Output | DC Voltage | 5V | 7.5V | 9V | 12V | 15V | 18V | 24V | |||
Rated Current | 2A | 1.2A | 1A | 0.8A | 0.6A | 0.5A | 0.5A | ||||
Current Range | 0~2A | 0~1.2A | 0~1A | 0~0.8A | 0~0.6A | 0~0.5A | 0~0.5A | ||||
Rated Power | 10W | 9W | 9W | 9.6W | 9W | 9W | 12W | ||||
Ripple & Noise Max (Note 2) | 120mVp-p | 120mVp-p | 120mVp-p | 120mVp-p | 120mVp-p | 120mVp-p | 120mVp-p | ||||
Voltage Tolerance (Note 3) | ±5% | ±5% | ±5% | ±5% | ±3% | ±3% | ±3% | ||||
Line Regulation(Note 4) | ±1% | ±1% | ±1% | ±1% | ±1% | ±1% | ±1% | ||||
Load Regulation(Note 5) | ±2% | ±2% | ±2% | ±2% | ±2% | ±2% | ±2% | ||||
Setup/Rise Time | 500ms 200ms 30ms (Full load) 30 | ||||||||||
Input | AC plug | AC-UK | AC-CN | AC-EN | AC-US | ||||||
Voltage Range | 100Vac~240Vac | ||||||||||
Frequency Range | 50/60Hz | ||||||||||
Efficiency(Typ.) | 80% | 80% | 85% | 85% | 85% | 85% | 85% | ||||
Current(Typ.) | 0.12A/200Vac | ||||||||||
Inrush Current(Typ.) | 35A/220Vac | ||||||||||
Leakage Current(Typ.) | < 0.35mA/220Vac | ||||||||||
Protection | Over Load | Rated output power: 110%~240% | |||||||||
Protection type:Hiccup mode,recovers automatically after fault condition is removed | |||||||||||
Over Voltage | Rated output Voltage:115%~135% | ||||||||||
Protection mode: diode clamp | |||||||||||
Over Temp(Note 5) | Crystal internal contact temperature exceeds 140 ℃, start over temperature protection. | ||||||||||
Protection mode: turn off the output voltage, the temperature drops automatically resume | |||||||||||
Environment | Working Temp | -0℃~50℃(Refer to "Derating curve ") | |||||||||
Working Humidity | 0~90%RH, non-condensing | ||||||||||
Storage Temp/Humidity | -10℃~75℃ 10~98%RH, non-condensing | ||||||||||
Temp. Coefficient | ±0.03%/℃(0~50℃) | ||||||||||
Vibration | 10Min/1 cycle,period for 60min,each along X,Y,Z axes | ||||||||||
Safety & EMC Note 7 | Safety Standards | GB4943,EN60950 | |||||||||
Withstand Voltage | I/P-O/P:2KVac | ||||||||||
Isolation Resistance | I/P-O/P:100M Ohms/500VDC/25℃/70%RH | ||||||||||
EMI Conduction Radiation | Compliance to: EN55022, EN61000-3-2,3, FCC part15,GB9254 class B,GB17625.1 | ||||||||||
EMS Immunity | Compliance to: EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A | ||||||||||
Others | Life | 2 years: 100% load, 30, 8 hours / day | |||||||||
MTBF | ≥1415.6Khrs | ||||||||||
Dimension | 74*28*42mm(L*W*H) | ||||||||||
Packing | 0.07Kg 100pcs/7Kg | ||||||||||
Connector | Plug/Wiring | For second pages, other models can be customized according to customer requirements. | |||||||||
Note | 1.If no special instructions are specified, all the specifications are measured at the input of 230VAC, the rated load, the ambient temperature of 25℃. 2.Ripple and noise measuring method: using a 12 "twisted pair, at the same time terminal to parallel 0.1uF and 47uF capacitor, in the 20MHZ bandwidth measurement. 3.Curacy: contains setting error, linear adjustment rate and load adjustment rate. 4.Linear adjust rate measurement: at rated load, from a low voltage to a high voltage test. 5.Load adjustment rate measurement method: from 20% to 100% 6.Overtemperature protection is determined by the function of the control IC. |
APM-12W | ||||||||
Model | AD-S0520B | AD-S07515B | AD-S0912B | AD-S1208B | AD-S1510B | AD-S1805B | AD-S2405B | |
Output | DC Voltage | 5V | 7.5V | 9V | 12V | 15V | 18V | 24V |
Rated Current | 2A | 1.5A | 1.2A | 0.8A | 1A | 0.5A | 0.5A | |
Current Range | 0~2A | 0~1.5A | 0~1.2A | 0~0.8A | 0~1A | 0~0.5A | 0~0.5A | |
Rated Power | 10W | 11.25W | 10.8W | 12W | 15W | 9W | 12W | |
Ripple & Noise Max (Note 2) | 120mVp-p | 120mVp-p | 120mVp-p | 120mVp-p | 120mVp-p | 120mVp-p | 120mVp-p | |
Voltage Tolerance (Note 3) | ±5% | ±5% | ±5% | ±5% | ±3% | ±3% | ±3% | |
Line Regulation(Note 4) | ±1% | ±1% | ±1% | ±1% | ±1% | ±1% | ±1% | |
Load Regulation(Note 5) | ±2% | ±2% | ±2% | ±2% | ±2% | ±2% | ±2% | |
Setup/Rise Time | 500ms 200ms 30ms (Full load) 30 |
APM-15W | ||||||||
Model | AD-S0520B | AD-S07520B | AD-S0915B | AD-S1212B | AD-S1510B | AD-S1810B | AD-S2405B | |
Output | DC Voltage | 5V | 7.5V | 9V | 12V | 15V | 18V | 24V |
Rated Current | 2A | 2A | 1.5A | 1.2A | 1A | 1A | 0.5A | |
Current Range | 0~2A | 0~2A | 0~1.5A | 0~1.2A | 0~1A | 0~1A | 0~0.5A | |
Rated Power | 10W | 15W | 13.5W | 14.4W | 15W | 18W | 12W | |
Ripple & Noise Max (Note 2) | 100mVp-p | 100mVp-p | 100mVp-p | 120mVp-p | 150mVp-p | 180mVp-p | 200mVp-p | |
Voltage Tolerance (Note 3) | ±5% | ±5% | ±5% | ±5% | ±3% | ±3% | ±3% | |
Line Regulation(Note 4) | ±1% | ±1% | ±1% | ±1% | ±1% | ±1% | ±1% | |
Load Regulation(Note 5) | ±2% | ±2% | ±2% | ±2% | ±2% | ±2% | ±2% | |
Setup/Rise Time | 500ms 200ms 30ms (Full load) 30 |
APM-18W | ||||||||
Model | AD-S0520B | AD-S07520B | AD-S0920B | AD-S1215B | AD-S1512B | AD-S1810B | AD-S2405B | |
Output | DC Voltage | 5V | 7.5V | 9V | 12V | 15V | 18V | 24V |
Rated Current | 2A | 2A | 2A | 1.5A | 1.2A | 1A | 0.5A | |
Current Range | 0~2A | 0~2A | 0~2A | 0~1.5A | 0~1.2A | 0~1A | 0~0.5A | |
Rated Power | 10W | 15W | 18W | 18W | 18W | 9W | 12W | |
Ripple & Noise Max (Note 2) | 120mVp-p | 120mVp-p | 120mVp-p | 120mVp-p | 120mVp-p | 120mVp-p | 120mVp-p | |
Voltage Tolerance (Note 3) | ±5% | ±5% | ±5% | ±5% | ±3% | ±3% | ±3% | |
Line Regulation(Note 4) | ±1% | ±1% | ±1% | ±1% | ±1% | ±1% | ±1% | |
Load Regulation(Note 5) | ±2% | ±2% | ±2% | ±2% | ±2% | ±2% | ±2% | |
Setup/Rise Time | 500ms 200ms 30ms (Full load) |
APM-24W | ||||||||
Model | AD-S0520B | AD-S07520B | AD-S0920B | AD-S1220B | AD-S1515B | AD-S1812B | AD-S2410B | |
Output | DC Voltage | 5V | 7.5V | 9V | 12V | 15V | 18V | 24V |
Rated Current | 2A | 2A | 2A | 2A | 1.5A | 1.2A | 1A | |
Current Range | 0~2A | 0~2A | 0~2A | 0~2A | 0~1.5A | 0~1.2A | 0~1A | |
Rated Power | 10W | 15W | 18W | 24W | 22.5W | 21.6W | 24W | |
Ripple & Noise Max (Note 2) | 120mVp-p | 120mVp-p | 120mVp-p | 120mVp-p | 120mVp-p | 120mVp-p | 120mVp-p | |
Voltage Tolerance (Note 3) | ±5% | ±5% | ±5% | ±5% | ±3% | ±3% | ±3% | |
Line Regulation(Note 4) | ±1% | ±1% | ±1% | ±1% | ±1% | ±1% | Contact Supplier
Contact us
Tell us your Buying Requirements
You Might Also Like |