E20 26mm cup slide-on mini glass hinge (one way)

E20 26mm cup slide-on mini glass hinge (one way)

Opening angle:

95°

Diameter of hinge cup:

26mm

Hinge cup altitude:

10.6mm

Door Drilling Size( K ):

4-8mm

Door thickness:

4-6mm

Scope:

glass door

Pipe Finish:

nickel plated

Main material:

cold-rolled steel、plastic

Packing:

200pcs/ctn

Payment Tearm:

t/t, 30% before production,70% before shipment.

Shipment Tearms:

1》ex-work price ; 2》fob guangzhou basic,china

Delivery Time:

45 days after received deposit

Opening angle:

95°

Diameter of hinge cup:

26mm

Hinge cup altitude:

10.6mm

*Send an Inquiry to this supplier

Supplier Info.

Company Name： AOSITE Hardware Precision Manufacturing Co.LTD

Registration Date： 1993

Country / Region： guangdong / China

City： zhaoqing

Main Products： cabinet door hinges,soft close cabinet hinges,gas spring

Product Detail

◇◆ Product Description

No matter how your door overlay are,AOSITE hinges series always can provides reasonable solutions for each application.

Model E20 is used to glass door,belonging to without hydraulic hinge,with self closing function,but this type of hinge is one way and slide on.Our standars Includes hinges, mounting plates,.Screws and decorative cover caps are sold separately.

Model:E20-09

Full overlay

Model:E20-08

Half overlay

Model:E20-07

Embed

◇◆ How to choose your door overlays

H=12+K-D

Full Overlay

This is the most common construction technique for cabinet doors.
You will be able to identify if your hinge is Full Overlay :
The Hinge Arm is relatively straight with no "hump" or "crank"
The Cabinet Door overlaps close to 100% on the cabinet side panel
The Cabinet Door does not share a side panel with any other cabinet door

H=4+K-D

Half Overlay

Much less common but used where space saving or material cost concerns are most important.
This technique uses the same side panel for two cabinets. To achieve this you would need a hinge that provides these features:
The Hinge Arm starts to bend inwards with a "crank" that offsets the door
The Cabinet Door only overlaps a bit less than 50% of the cabinet side panel
The Cabinet Door does not share a side panel with any other cabinet door

H=A+K-4

Inset/Embed

This is a technique of cabinet door production that allows the door to sit inside the cabinet box.
You will be able to identify that your hinges are Inset if:
The Hinge Arm is quite noticeably bent inwards or highly "cranked"
The Cabinet Door does not overlap with the side panel but sits inside

D:Overlay calculation form

A:Gap calculation form

H=Height of mounting plate
D=Required overlay on the side pane
K=Distance between door edge and dritlling holes on hinge cup
A=Gap between door and side panel
X=Gap between mounting plate and side panel

Refer to the following formula to choose the arm of hinge,if you want to solve the problem,we must know “K” value ,that’s the distance drilling holes on the door and “H”value which is the height of mounting plate.

◇◆ Hinge application and adjustment

Door overlay adjustment: +5mm
Depth adjustment:-3mm/+4mm
Height adjustment:-2mm/+2mm

undefined

◇◆ Hinge Cup Pattern

45mm Cup

45mm Cup is the most common hinge cup pattern for European style hinges.Almost all of the major Hinge manufacturers selling European style hinges including Blum, Salice, and Grass are with this hinge cup pattern.
Diameter of the hinge cup or "boss" that inserts into the cabinet door is 35mm.
Distance between screw holes (or dowels) is 45mm.
Center of screws (dowels) is 9.5mm offset from the hinge cup center.

48mm Cup

48mm Cup is the most common hinge cup pattern used by Chinese (imported) cabinet makers. This is also a common universal standard for other major Hinge manufacturers in areas outside North America, including Blum, Salice, and Grass. These will be very difficult to source as replacements in North America. It is recommended to switch to a more commonly available cup type in that case.Diameter of the hinge cup or "boss" that inserts into the cabinet door is 35mm.Distance between screw holes (or dowels) is 48mm.Center of screws (dowels) is 6mm offset from the hinge cup center.

52mm Cup

52mm Cup is a less common hinge cup pattern used by some cabinet makers,but it’s most popular in Korea market.This pattern is mainly for compatibility with some European hinge brands like Hettich and Mepla.
Diameter of the hinge cup or "boss" that inserts into the cabinet door is 35mm.
Distance between screw holes (or dowels) is 52mm.
Center of screws (dowels) is 5.5mm offset from the hinge cup center.