K14 Stainless Steel clip-on hydraulic hinge

K14 Stainless Steel clip-on hydraulic hinge

Opening angle:

100°

Diameter of hinge cup:

35mm

Hinge cup altitude:

12mm

Door Drilling Size( K ):

3-7mm

Door thickness:

14-20mm

Scope:

cabinets、wood layman

Pipe Finish:

electrolysis

Main material:

stainless steel

Packing:

100or 200pcs/ctn

Payment Tearm:

t/t, 30% before production,70% before shipment.

Shipment Tearms:

1》ex-work price ; 2》fob guangzhou basic,china

Delivery Time:

40-45days after received deposit

Opening angle:

100°

Diameter of hinge cup:

35mm

Hinge cup altitude:

12mm

*Send an Inquiry to this supplier

Supplier Info.

Company Name： AOSITE Hardware Precision Manufacturing Co.LTD

Registration Date： 1993

Country / Region： guangdong / China

City： zhaoqing

Main Products： cabinet door hinges,soft close cabinet hinges,gas spring

Product Detail

◇◆ Product Description: MODEL-K14

Model K14 also is one way hydraulic damping hinges,but this hinge’s main material is stainless steel,so with superior ability to anti-rust.With clip on mounting plate, can more convenient to adjust the connecting door and hinge. Our standars Includes hinges, mounting plates,.Screws and decorative cover caps are sold separately.

0-10db

Sound wave passing through

20db

Hinge sound

30db

Whispering

◇◆ PRODUCT DETAILS

TWO-DIMENSIONAL SCREW

The adjustable screw is used for distance adjustment, so both sides of the cabinet door can be more suitable.

EXTRA THICK STEEL SHEET

The thickness of hinge from us is double than current market,which can strengthen the service life of hinge.

BLANK PRESSING DESIGN

Blank pressing hinge cup make more touch area of the hinge and cabinet door,enabling steady operation.

HYDRAULIC CYLINDER

Hydraulic buffer makes a better effect of a quiet enviornment.

BOOSTER ARM

Extra thick steel sheet increases the work ability and service life .

AOSITE LOGO

Clearly logo printed,certified the guarantee of our products.

◇◆PRODUCTS STRUCTURE

1.ADJUSTNG THE DOOR FRONT/ BACK
The size of the gap is regulated by screws.
2.ADJUSTING COVER OF DOOR
Left / right deviation screws adjust 0-5 mm.
3.HYDRAULIC DAMPING SYSTEM
Unique closed function, ultra quiet.

4.SECONDARY TRANSMISSION DEVICE
The door is stable and the service life is longer.
5.BLANK PRESSING DESIGN
Cupboard door is more solid and reliable.
6.AOSITE LOGO
A clear AOSITE anti-counterfeit LOGO is found in the plastic cup.

Model:K14-09

Full overlay

Model:K14-08

Half overlay

Model:K14-07

Embed

◇◆ MODEL:K14

◇◆HINGE SELECTION

How to choose cold rolled steel

stainless steel?

The choice of cold rolled steel and stainless steel should be different from the use scenarios, if in damp places.

For example, stainless steel is used in kitchen and bathroom, otherwise cold rolling steel can be used in bedroom study.

DAMP PLACE

DRY PLACE

◇◆MODEL:K14

Full Overlay

The full cover is also called straight bending and strai

ght arms

Door panel covers the side panel

The cover is suitable for the cabinet body which cover

s the side panels.

Half Overlay

Half cover is also called middle bend and small arm.

Door panel covers half of the side panel

The cupboard door covers the side plate, half of which has doors on both sides of the cabinet.

Inset

No cap, also called big bend, big arm.

Door panel don’t covers the side panel

The door is not covered by the cabinet door, and the cabinet door is inside the cabinet.

◇◆HOW TO CHOOSE YOUR DOOR OVERLAYS

Full Overlay

This is the most common construction technique for cabinet doors.

You will be able to identify if your hinge is Full Overlay:

The Hinge Arm is relatively straight with no "hump" or "crank"

The Cabinet Door overlaps close to 100% on the cabinet side panel

The Cabinet Door does not share a side panel with any other cabinet door

H=15+K-D

Half Overlay

Much less common but used where space saving or material cost concerns are most important.

This technique uses the same side panel for two cabinets. To achieve this

you would need a hinge that provides these features:

The Hinge Arm starts to bend inwards with a "crank" that offsets the door

The Cabinet Door only overlaps a bit less than 50% of the cabinet side panel

The Cabinet Door does not share a side panel with any other cabinet door

H=5+K-D

Inset/Embed

This is a technique of cabinet door production that allows the door to sit

inside the cabinet box.

You will be able to identify that your hinges are Inset if:

The Hinge Arm is quite noticeably bent inwards or highly "cranked"

The Cabinet Door does not overlap with the side panel but sits inside

H=A+K-4

◇◆HOW TO CHOOSE YOUR DOOR OVERLAYS

H=Height of mounting plate

D=Required overlay on the side pane

K=Distance between door edge and dritlling holes on

hinge cup

A=Gap between door and side panel

X=Gap between mounting plate and side panel

Refer to the following formula to choose the arm of hinge,if you want to solve the problem,we must kno w “K” value ,that’s the distance drilling holes on the door and “H”value which is the height of mou nting plate.

◇◆OPTIONAL HINGE HOLE DISTANCE PATTERN

45mm Hole distance

45mm Hole distance is the most common hinge cup pattern for European style

hinges.Almost all of the major Hinge manufacturers selling European

style hinges including Blum, Salice, and Grass are with this hinge cup pattern.

Diameter of the hinge cup or "boss" that inserts into the cabinet door is 35mm.

Distance between screw holes (or dowels) is 45mm.

Center of screws (dowels) is 9.5mm offset from the hinge cup center.

48mm Hole distance

48mm Hole distance is the most common hinge cup pattern used by Chinese (imported) cabinet makers. This is also a common universal standard for other major Hinge manufacturers in areas outside North America, including Blum, Salice, and Grass. These will be very difficult to source as replacements in North America. It is recommended to switch to a more commonly available cup type in that case.Diameter of the hinge cup or "boss" that inserts into the cabinet door is 35mm.Distance between screw holes (or dowels) is 48mm.Center of screws (dowels) is 6mm offset from the hinge cup center.

52mm Hole distance

52mm Hole distance is a less common hinge cup pattern used by some cabinet makers,but it’s most popular in Korea market.This pattern is mainly for compatibility with some European hinge brands like Hettich and Mepla. Diameter of the hinge cup or "boss" that inserts into the cabinet door is 35mm.

Distance between screw holes (or dowels) is 52mm.

Center of screws (dowels) is 5.5mm offset from the hinge cup center

◇◆MOUNTING-PLATE

(2-Hole Iseparable Hinge Base)