Characteristics: | Double pack, it features smooth paint film and good gloss with durable resistance to weather and pollution. |
Surface cleaning: | Remove containments and clean the substrate (1K basecoat) with EC-5910 Degreaser. |
Mixing ratio: | Clear Coat: Activator: Reducer = 2 : 1 : 0-0.1 |
Spray Gun | Gravity feed: 1.2-1.4mm; HVLP: 2.0 bar |
Spraying | Spray 2-3 coats, total should be 40-60μm Drying time: 20 ℃, 45 mins; 60 ℃, 30 mins. For temperature lower than 15℃, recommend full bake at 60℃. Apply EC-5920 Thinner SRA directly on the overspray areas to achieve a natural transition. |
Defects preventing | Add 0.5-1% EC-5930 Anti Silicon in the paint remained and re-spray affected areas to solve fisheyes. Add EC-5960 Retarder Solvent when temperature is over 30℃ (54℉) to avoid blushing. If runs happen, sand with P1200-P2000 sand paper after thorough drying and then polish. |
Contact
Supplier