Main features 2.The voltage of the power supply should not exceed +40VDC. 3.The input signal is compatible with TTL. 4.The maximum driver current is 1A/phase. 6.With excellent stability ,for control signals and internal signals are photoelectrically insulated. |
Setting the switch of DIP ON=1 OFF=0
The options of the motor subdivision times | |||
K1 | K2 | K3 | Subdivision times |
1 | 1 | 1 | 1 |
0 | 1 | 1 | 2 |
1 | 0 | 1 | 4 |
0 | 0 | 1 | 8 |
1 | 1 | 0 | 16 |
0 | 1 | 0 | 32 |
1 | 0 | 0 | 64 |
The options of the rated current | |||
K4 | K5 | K6 | rated current |
1 | 1 | 1 | 0.15 |
0 | 1 | 1 | 0.25 |
1 | 0 | 1 | 0.4 |
0 | 0 | 1 | 0.5 |
1 | 1 | 0 | 0.6 |
0 | 1 | 0 | 0.7 |
1 | 0 | 0 | 0.85 |
0 | 0 | 0 | 1 |
＜﹢40V,GND | DC power ﹢15V—40V AC power ＜30V |
A﹢,A－ | The motor phase A |
B﹢,B－ | The motor phase B |
﹢COM | Common Port are insulated photoelectrically, typical value is ﹢5V |
CP | Pulsing signal,the trailing edge(Negedge) is effective |
DIR | Dir control signals |
ENA | DN(Driving enable),high level or offline running |
Connetion Schematic drawing and installation size
Contact
Supplier
