Product Information
Inch Round Gage Blocks | |||||
Pcs/set | Size(mm) | Grade | Diameter | Thread | Item No. |
36 | 0.0500, 0.0600, 0.0625, 0.0700, 0.0800 | ±0.0001 | 3/4'' | 1/4-28UNF | 630-4050 |
0.090, 0.100, 0.200 ,0.300, 0.400 ,0.500 | M6 | 630-4051 | |||
0.600, 0.700 0.800, 0.900, 1.00 | |||||
1.000,0.101,0.102,0.103,0.104,0.105 | |||||
0.106,0.107,0.108,0.109,0.110,0.120 | |||||
0.125, 0.130, 0.140, 0.150, 0.160, | |||||
0.170, 0.180, 0.190 |
◪ The measuring face are the two parallel ends.
◪ The diameter of the inner hole is 6.5mm, when the dimension less 0.080'' & the inner hole is 1/4-28UNF when the diamension is not less than 0.080''.
◪ Individual gage block is available.
Applications
◪ Used as a reference for the calibration of measuring instruments, such as micrometers, calipers, dial indicators,sine bars,etc.
Contact
Supplier