WHY Maydos? 
Capable — Top 5 manufacturer in China! Biggest factory in Asia!
Professional — 10 years' experience for export!
Eternal — Stable quality and price!
Supportable — Overseas technical support and return visit after sale!
Description:
Maydos PE White Primer Paint E362-1 is a short name for unsaturated polyester paint. The paint is formed through this way: the unsaturated polyester resin catalyzed by initiator(white water) and catalyst(blue water), reacts with active monomer to form paint film. It is your best choice for decoration and protection of various wooden furniture. The high film building character can also bring out natural wooden beauty to the full.
Advantages:
1. High solid content; excellent fullness of film.
2. Thick coating for once.
3. High sanding performance & good abrasion.
4. High application efficiency & easy to apply.
5. Primer can improve hardness of topcoat to save consumption of topcoat.
Technical Data:
Color: White
Solid Content: 95±1%
Viscosity: 20000-25000 cpa.s
Specific Gravity: 1.593±0.05 kg/L
Fineness: ≤80
Pot Life at 25℃: 35 minutes
Recommended Consumption: 240 g/m2
Number of Coats: 2 coats
Interval of Each Coat: 30 minutes
Drying Time(25℃, relative humidity: 75%):
Touch Dry: 30-40 minutes
Hard Dry: 24 hours
Sanding: 12 hours minimum
Shlef Life:
6 months in sealed tins.
Packing Size:
4L, 20L, 25L, 200L.
Application Tools:
Spray gun.
Application Method:
Finishing (topcoat) highlights the beauty of wood, but the process also magnifies imperfections. Sand the wood smooth and repair all defects before finishing.
1.To produce smooth surfaces on bare wood, always sand with the grain of the wood. The material should go through at least three sandings with successively finer grit sandpaper. Start with 80 grit, move to 150 grit and finish with 220 grits. Use a tack cloth to remove dust between sandings.
If you are using paint as a topcoat over another finish, simply scuff sand the existing finish with steel wool or synthetic steel wool. Scuff sanding gives the paint topcoat something to bite into for better adhesion with the existing finish.
2.On bare wood, apply a light coat of paint and allow it to dry fully. After the first coat has dried, lightly sand, with fine grit paper, to remove any raised grain.
On an existing finish, apply a coat of paint and allow it to dry according to the manufacturer's instructions before.
3.Sand the dried paint lightly with 400 or higher grit sandpaper, steel wool or synthetic steel wool. Remove any sanding dust with a tack cloth.
4.Brush or wipe on another coat of paint and allow it to dry.
5.Continue to apply coats of paint as indicated in steps 2 through 4 until you achieve the surface build-up you desire.
6.Inspect the finish for small nicks or imperfections. Rub out any rough spots with steel wool or synthetic steel wool. Wipe with a clean tack cloth to remove any dust. For extra protection, polish the surface with paste wax or furniture polish.
Storage:
Store it in dry and well-ventilated place. Avoid severe sunshine, heat and rain. Keep out of reach of children.
Mixing Ratio:
Certificates:
Contact
Supplier
