Products Info
HOME> Maydos M8720 Eco-Friendly PU Wood Floor Lacquer >
Maydos M8720 Eco-Friendly PU Wood Floor Lacquer

Maydos M8720 Eco-Friendly PU Wood Floor Lacquer

Product Detail

WHY Maydos?  

 

Capable —            Top 5 manufacturer in China! Biggest factory in Asia!

Professional —     10 years' experience for export!

Eternal  —             Stable quality and price!

Supportable —     Overseas technical support and return visit after sale!

Description:

Maydos Hard Scratching Resistant PU Wood Lacquer M8720 is featured with superior hardness and whitening resistance. The elegant paint film is transparent and highly scratching resistant.


Advantages:

1. Fullness and good lacquer film.

2. Superior hardness withstands scratching and allows longer life.

3. Strong resistance to yellowing and resistance to damages by ultraviolet (UV) rays.

4. Resistance to high temperature and aging.

5. Varnishes are highly transparent and is resistant to whitening.


Technical Data:

Gloss: Glossy, Matt, Semi-glossy
Theoretical Coverage(mixed complex): 

Finish: 8-10m2/kg/coat

Primer: 9-12m2/kg/coat

Drying Time(25, relative humidity: 75%):

Touch Dry: 30 minutes

Hard Dry: 24 hours


Shlef Life: 
12 months in sealed tins.

Packing Size: 

5kg, 9kg (Set pack) or 1L, 3L, 4L, 12L, 18L, 20L, 200L.


Application Tools: 

Brush, Spray gun, Roller.

Application Method: 

1. Make sure all surfaces must be clean, dry and free from wax, grease, oil etc. 

2. For bare wood, sand down in the direction of the grain until smooth with fine abrasive sandpaper. Start with 80# 
    sandpaper, and then150# and last 220#. Use clean cloth to remove dust between sanding. 

3. If you are using paint as a topcoat over another finish, sand the existing finish first with steel wool or synthetic 
    steel wool. 

4. Apply a thin coat of paint on the wood and allow it to dry completely. After the first coat has dried, sand it lightly 
    with fine abrasive paper to remove any raised grain. 

5. Brush or spray another coat of paint and allow it to dry.

6. Continue to apply coats of paint until you achieve the surface build-up you desire.

7. Check the finish to see whether there are small nicks or imperfections. Rub out any rough spots with steel wool 
    or synthetic steel wool. Wipe with a clean tack cloth to remove dust. For extra protection, polish the surface with 
    paste wax or furniture polish. 


Storage:
Always store in cool & dry places and avoid ignition & heat.


Mixing Ratio:


Certificates
:



Contact

Supplier

Contact us
Tell us your Buying Requirements