WHY Maydos? 
Capable — Top 5 manufacturer in China! Biggest factory in Asia!
Professional — 10 years' experience for export!
Eternal — Stable quality and price!
Supportable — Overseas technical support and return visit after sale!
Description:
Maydos Nail-Free Adhesive NFA09 with extremely adhesive force and bonding ability, is aimed to replace the metallic nail as general-purpose adhesive, and it doesn’t require drilling holes for fixing and bonding materials such as wood, MDF board, gypsum board, stone, concrete, ceramics, metal, plastic, rubber and so on.
Advantages:
1. Strong bonding property, high bonding strength.
2. High flexibility, bonding power not affected by shrink of building.
3. Wide application range, suitable for most of materials, even wet wood.
4. Suitable for filling gaps, cracks; Painting can be done after adhesive hardens.
5. Excellent weathering-resistance, water-proof property.
6. Non-toxic, no pollution, free of hazardous substances like benzene, formaldehyde etc.
Technical Data:
Appearance: Heavy paste, viscous liquid
Color: Ceramic white, Brown, Transparent
Odor: Solvent with low odor
Viscosity: Approximately 110,000 Mpa.S/25℃
Solids Content: approximately 78%-84%
Specific Gravity: 1.30kg/L
Application Temperature: -20℃ to + 50℃
Initial Contact Time: 3-10 minutes, depending on temperature
Open Time: 10-20 minutes, depending on temperature
Maximum Bond: 5-7 days depending on temperature & thickness
Shlef Life:
12 months.
Packing Size:
360g / 300ml per tube.
Application Method:
1. Surface preparation: Bonding surface should be clean and free of dust and rust.
2. Cut up the tube top, put the adhesive mouth and squeeze out the adhesive by sealing gun.
---Dry Bonding: (suitable for light materials & joints for light pressure)
Squeeze out the adhesive in form of “Z” ,line distance about 40cm. Apply to material A, then press to bonding
area B lightly, wait for a few minutes about 5~8 minutes, then press the two surfaces with strong pressure.
---Wet Bonding: (Suitable for heavy materials)
Apply the adhesive same way as above, then clamp or fasten up the two materials by tools like pliers, screws to
maintain maximum surface contact at bonded interfaces. Fix and wait for 24 hours till the adhesive dries, then
remove the fixing tools. The adhesive is movable within 20 minutes since bonding, becomes stronger 2-3 days
after bonding, reaches best performance till 7 days.
Storage:
1. Keep it out of direct sunlight and store in cool, dry and ventilated place.
2. Keep the tube securely sealed.
3. Discharge the waste adhesive only after it becomes totally dry.
4. Don’t pour into water tubes.
Where to Use:
Certificates:
Contact
Supplier
