V6-H-4D355G MCU Motor Controller
Auxiliary Drive
V6-H-4D355G MCU Motor Controller | |
Adaptable motor type | Permanent magnet synchronous motor、Three phase asynchronous motor |
Applicable vehicle type | 9-18m Passenger Car、Rail Car、Logistics Vehicle、Heavy Truck |
Product type | V6-H-4D355G |
Rated input voltage | DC 540V |
Rated power | 355kW |
Input voltage range | DC 350V~750V |
Rated output current | 541A |
Maximum output current | 975A |
Output frequency range | 0~1000Hz |
Protection level | IP67 |
Cooling type | Water cooling |
Outline dimension | 552*540*177(mm) |
Weight | 25.5kg |
V6-H-4D5.5G & V6-H-4D5.5G Three-in-one Auxiliary Controller (Oil pump + Air pump +DC/DC) | |
Adaptable motor type | Permanent magnet synchronous motor、Three phase asynchronous motor |
Applicable vehicle type | Medium Bus、Large Bus、Logistics Vehicle |
Product type | V6-H-4D5.5G & V6-H-4D5.5G |
Rated input voltage | DC 540V |
Rated power | 5.5kW & 5.5kW & 3kW |
Input voltage range | DC 350V~750V |
Rated output current | 13A & 13A , DC 27.5V |
Maximum output current | 19.5A & 19.5A , DC 130A |
Output frequency range | 0~300Hz |
Protection level | IP67 |
Cooling type | Water cooling |
Outline dimension | 333*308*159(mm) |
Weight | 13.5kg |
V6-H-4D355G MCU Motor Controller
V6-H-4D5.5G & V6-H-4D5.5G Three-in-one Auxiliary Controller (Oil pump + Air pump +DC/DC)
This device integrates the motor controller, DC / DC converter and charger, and is controlled by one MCU. Only one board and one shell are needed. The external wiring is simple, it occupies a small assembly space of the vehicle, and has high system reliability. low cost.
The three-in-one electric vehicle controller communicates with the vehicle's VCU, BMS and other equipment through an MCU connected CAN circuit, thereby controlling the motor controller, charger and DC / DC converter to work according to the vehicle system requirements. Reduce the use of MCU and communication chips and save costs.
Contact
Supplier