Shared Measuring Bracket Inspection Fixture

TTM19373 Common measuring bracket checking fixture has high measurement accuracy, no fear of deformation, low maintenance cost and good convenience. Key product characteristic inspection, characteristic line inspection, function hole inspection, area detection which is prone to deformation in assembly process, for automobile assembly and production function matching inspection. In the production process of automotive parts, on-line inspection of automotive parts is realized, which ensures the rapid judgment of the quality status of automotive parts in production, ensures the safety and processing speed of automotive assembly, and improves the quality of automotive parts.

operation sequence
1.Visual inspection to check part sharp edges ,cracks and burrs.
2.Open all the clamps、rotating mechanismes,load the part on the body.
3.Adjusting the part keep it well contact nets.
4. When the product is tested, the A3 zero-stick limit pin is taken out.
5. Turn off the flip mechanism.
6. Insert the B/C and C2 limit pins after fixing the product with B/C and C2 pins.
7.Close clamp 1-3.
8.Do CMM inspection.
9.Recording results on the inspection sheet.
10.Open all the clamps、rotating mechanismes take the part out of the gauge.
Product size：252*234*70mm