● SKW50 CNC bending machine is specially designed for the bending design of pipe fittings. It can be used for winding bending of pipe and wire in cold state. It is widely used in air conditioning, automobile, furniture, sports equipment, plumbing and heating equipment and other industries
● This machine can bend diameter in the diameter of 16~ with 50 2.0mm wall thickness in stainless steel tube. The mould clamping, clamping, sending core institutions such as the use of hydraulic control; the bending axis, rotation axis, feeding shaft driven by a servo motor controlled by CNC sent straight, the whole control system, which can realize four axis linkage, active type of pipe, pipe and other functions throughout the complex type. Parameter setting and operation switch through the operation interface English system, simple operation, reliable and user-friendly. The machine has good stability, good repeatability, high efficiency characteristics, very suitable for complex pipe bending.
Maximum bend diameter specification | Soft copper tubes of phi 54*2.0 or more, Phi 65 copper tubes |
Radius of curvature | R30 to R100 |
Maximum length of machined workpiece | Active: 2050mm |
Through: 3800mm | |
Maximum bending angle | 190 degrees |
Maximum rotation angle | + 360 degrees |
Elbow efficiency | 3-7 second / bend |
Maximum feeding speed | 1000mm/S |
Maximum bending speed | 180 degrees /S |
Maximum rotation speed | 360 degrees /S |
X axis repeated positioning accuracy | ±0.05mm |
Y and Z axis repeated positioning accuracy | + 0.1 degrees |
Maximum pressure of oil circuit | 11 Mpa |
Total equipment power | 11KW |
Equipment weight | 2T |
Power specification | 380 + 10V, 50Hz |
Outline dimensions (X X in width) | 4500×1300×1200mm |
Contact
Supplier