1.Characteristics:
. YT928 is single-component structural silicone sealant product.
. Neutral curing,non-corrosive to metal,coated glass,concrete,marble etc;
. Excellent resistance to weather,and the service life is over 50 years in the condition of general weather;
. Excellent resistance to low and high temperature change.Little changes of performance at -40~150℃;
. Excellent adhesion to most common building material without priming;
. High intensity,High adhesion,mid modulus,high flexility;
. Good compatibility with other neutral Silicone Sealants.
. Belong to non-dissolvent product,low vulcanization shrinkage and green environmental protection product.
2.Purpose:
. For structural glazing in glass,stone(marble,granite),aluminum curtain wall,glass roof and metal structure engineering;
. As a secondary edge adhesive sealant;
. Many other uses.
3.Typical Technology Data:
No. | Performance | Standard | Measured value | Single Evaluate | |
1 | Appearance | Fine and uniform ointment,it shall not have block gel, surface coagulation and educt that cannot disperse quickly. | Conform standard | Qualified | |
2 | Slumpability(mm) | Vertical,(mm) | ≤ 3 | 1 | Qualified |
Horizontal | Non distorted | Non distorted | |||
3 | Extrusion,(s) | ≤ 10 | 1.8 | Qualified | |
4 | Apply,20min/h,s | / | / | ||
5 | Tack-Free Time(h) | ≤ 3 | 0.8 | Qualified | |
6 | Harducss(HA) | 30~60 | 44 | Qualified | |
7 | Tension boding strength(Mpa) | 0.6 | 0.9 | GB16776-2005 | |
8 | Max. strength elongation(%) | 100 | 16.5 | GB16776-2005 | |
9 | Aging test | Loss of heating% | ≤ 10 | 1.5 | Qualified |
chop | / | / | Qualified | ||
pulverized | Non | Non | Qualified | ||
Stability | Store for 9 months at -20~27℃ in cool ,dry places after date of delivery |
4.Application Standard:
. National standard GB16776-2005 Silicone Structural Sealant
. U.S.A ASTM C 1184-2013 Silicone Structural Sealant
. Company standard Q/(NG)YT 1-2005 Silicone Structural Sealant
5.Color:
. Black,gray,white or other color on request to YT928
6.Package:
. YT928 310ml Cartridge net 300ml、590ml multi-membrane cartridge.
7.Restriction of Usage:
. Unsuitable for all kinds of material that can effuse grease,plasticizer or solvent;
. YT928 is unsuitable for the airproof location,because it is required to absorb moisture in air
. Unsuitable for the frosty or moist surface;
. Unsuitable for the continually soggy or moist place;
. Cannot be used if the temperature is below 4℃ or above 40℃ on the surface of the materials.
8.Technical Service:
. Offer the integral technical data of the products.
-Adhesion test:
The
products of YT928 silicone sealant have excellent adhesion to most
common building material,such as glass、anodized aluminum、 ceramic tile、
granite、brick、wood、steel and most plastics.But we cannot ensure our
sealants are suitable to all materials,as a result of the unceasing
appearance of new building materials and the application of new surface
treatment technology. In some cases,it is required to have the
adhesion test on the substrates.ln the laboratory of our company,we can
carry out the adhesion test for clients and give the test report that
includes experimental result,recommended products.cleaning methods of
the material surface etc.
-Compatibility Test:
If the accessory
materials like baker,double-sided glue strip can not be compatible with
silicone rubber,it may cause silicone rubber to turn colors,even lose
adhesion,To avoid these problems,we provide services of compatibility
test for clients.Clients can send the accessory to us by mail(or other
ways),then we will carry out the compatibility test ane give the test
report.
-Staining Test:
We provide services of pollution test for
clients.Clients can send the substrates to us by mail(or other
ways),then we will carry out the staining test and submit the test
report.
9.Joint Design:
. The joint design of
silicone structural sealant must be carried out according to JGJ102“The
Technical Order of Glass Curtain Wall Engineering”by professional
designers;
. The width and thickness of silicone strucrural sealant are no less than 6mm;
. The width of silicone structural sealant should be greater than or equal the thickness;
. The joint of silicone structural sealant can be full of the sealant according to common working procedure;
.
The design strength of silicone sturctural sealant for short term is
0.14Mpa,and the permanent load design strength is 0.007 Mpa;
. The
adhesive width and thickness design of silicone structrual sealant must
be carried out according to JGJ102“The Technical Order of Glass Curtain
Wall Engineering”;
. The sealant should be able to exposure in the air.Cannot move the joint during the cure.
10.Working procedure:
See also“The Technology lnstruction of YuanTong Silicone Structural Sealant”
11.Safety:
. Non-toxicity when cured;
.
Avoid eye contact before curing.lf happened,rinse opened eye for
several minutes under running water,then consult with a doctor;
. Keep away from children;
. Ensure adequate ventilation at workplace or curing area.
12.Estimation of Dosage:
Remark:The actual dosage of silicone sealant
may be different from interface design,installation place of gasket
material,dressing technology and amount of wastage on site.
Table 1 Construction Length of Each YT928 (300ml) Silicone Sealant
Thickness(mm) | Width mm | ||||||
6 | 9 | 12 | 15 | 18 | 21 | 24 | |
6 | 8.3 | 5.5 | 4.2 | 3.3 | 2.8 | 2.4 | 2.1 |
9 | / | 3.7 | 2.8 | 2.2 | 1.8 | 1.6 | 1.4 |
12 | / | / | 2.1 | 1.7 | 1.4 | 1.2 | 1 |
13.Cure Time:
.
YT928 begins cure from surface to deep after exposure in the air.The
Tack-Free Time is about 50min, and the entire curing takes place after
21 days.
14.Important:
The information contained in
this instruction is to correct.However,by no means can it be considered
an absolute guarantee,as usage and application of the product in
accordance with the instruction given and their success in application
is beyond our control and is dependent on a number of factors.Clients
should have a good knowledge of the product and make independent
judgments of optimal usage before application.
*Color Tags: clear silicone sealant, transparent silicone sealant, black silicone sealant, crystal silicone sealant, white silicone sealant, red silicone sealant, brown silicone sealant, grey silicone sealant, blue silicone sealant, green silicone sealant, silver silicone sealant, dark brown silicone sealant, yellow silicone sealant, colored silicone sealant
*Application Tags: silicone sealant for glass, silicone sealant for metal, silicone sealant for stone, silicone sealant for marble, silicone sealant for aluminum, silicone sealant for granite
Contact
Supplier